[asterisk-ss7] CIC blocking command

[Attila Domjan]

Yes it will
I'm working many improvements/fixing on libss7, I hope today will be
ready for testing.

my cli is:
*CLI> ss7 block cic 
Usage: ss7 block cic <linkset> <dpc> <CIC>
       Sends a remote blocking request for the given CIC on the
specified linkset


Regards,
Attila

On Tue, 2008-09-16 at 11:20 +0200, Martin Kuca wrote:
> Hello,
> i have 2 pointcodes routed to adjacent PC with the same CICs numbers in 
> one linkset.
> when i use command: Usage: ss7 block cic <linkset> <CIC>
> it will block me 2 cics :-(
> 
> linkset = 1             ; Pick a number for your linkset identifier in 
> zapata.conf
> pointcode = xxx1                ; The decimal form of your point code.  
> If you are using an
> adjpointcode = xxx6     ; The point code of the switch adjacent to your 
> linkset
> defaultdpc = xxx6               ; The point code of the switch you want 
> to send your ISUP
> cicbeginswith = 2       ; Number to start counting the CICs from.  So if 
> Zap/1 to
> sigchan = 1             ; This is where you declare which Zap channel is 
> your signalling
> group = 1
> channel=2-31            ; Use Zap/1-15 and assign them to CICs 1-15
> 
> adjpointcode = xxx6
> defaultdpc = xxx7
> cicbeginswith=1
> channel=125-155
> 
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080916/e3d31103/attachment.pgp