[asterisk-ss7] CIC blocking command

[Martin Kuca]

Hello,
i have 2 pointcodes routed to adjacent PC with the same CICs numbers in 
one linkset.
when i use command: Usage: ss7 block cic <linkset> <CIC>
it will block me 2 cics :-(

linkset = 1             ; Pick a number for your linkset identifier in 
zapata.conf
pointcode = xxx1                ; The decimal form of your point code.  
If you are using an
adjpointcode = xxx6     ; The point code of the switch adjacent to your 
linkset
defaultdpc = xxx6               ; The point code of the switch you want 
to send your ISUP
cicbeginswith = 2       ; Number to start counting the CICs from.  So if 
Zap/1 to
sigchan = 1             ; This is where you declare which Zap channel is 
your signalling
group = 1
channel=2-31            ; Use Zap/1-15 and assign them to CICs 1-15

adjpointcode = xxx6
defaultdpc = xxx7
cicbeginswith=1
channel=125-155


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3505 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080916/9a0f879b/attachment.bin