[asterisk-ss7] Need help with SS7 setup

[mark morreny]

Hi,

I am having trouble with two issues here.
1.  Is there any winpipe version that supports DAHDI?

2.

With zaptel installed, I can't get my channels configured:

root at localhost etc]# ztcfg -vv

Zaptel Version: 1.4.12.1
Echo Canceller: MG2
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)

31 channels to configure.


[root at localhost asterisk]# cat /proc/zaptel/1
Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3/CCS/CRC4 RED

           1 WPE1/0/1 Clear RED
           2 WPE1/0/2 Clear RED
           3 WPE1/0/3 Clear RED
           4 WPE1/0/4 Clear RED
           5 WPE1/0/5 Clear RED
           6 WPE1/0/6 Clear RED
           7 WPE1/0/7 Clear RED
           8 WPE1/0/8 Clear RED
           9 WPE1/0/9 Clear RED
          10 WPE1/0/10 Clear RED
          11 WPE1/0/11 Clear RED
          12 WPE1/0/12 Clear RED
          13 WPE1/0/13 Clear RED
          14 WPE1/0/14 Clear RED
          15 WPE1/0/15 Clear RED
          16 WPE1/0/16 HDLCFCS RED
          17 WPE1/0/17 Clear RED
          18 WPE1/0/18 Clear RED
          19 WPE1/0/19 Clear RED
          20 WPE1/0/20 Clear RED
          21 WPE1/0/21 Clear RED
          22 WPE1/0/22 Clear RED
          23 WPE1/0/23 Clear RED
          24 WPE1/0/24 Clear RED
          25 WPE1/0/25 Clear RED
          26 WPE1/0/26 Clear RED
          27 WPE1/0/27 Clear RED
          28 WPE1/0/28 Clear RED
          29 WPE1/0/29 Clear RED
          30 WPE1/0/30 Clear RED
          31 WPE1/0/31 Clear RED


ifconfig:

w1g1      Link encap:Point-to-Point Protocol
          UP POINTOPOINT NOARP  MTU:8  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:58 Memory:f8d30000-f8d31fff


[root at localhost asterisk]# wanrouter status

Devices currently active:
        wanpipe1


Wanpipe Config:

Device name | Protocol Map | Adapter  | IRQ | Slot/IO | If's | CLK | Baud
rate |
wanpipe1    | N/A          | A101/1D/A102/2D/4/4D/8| 58  | 1       | 1    |
N/A | 0         |

Wanrouter Status:

Device name | Protocol | Station | Status        |
wanpipe1    | AFT TE1  | N/A     | Connecting    |



Any suggestion or hint will be greatly appreciated.

Thanks,
Mark
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20081005/c0955f7e/attachment.htm