[asterisk-ss7] Need help with setting up Sangoma 101 with libss7+ wanpip

[Mitul Limbani]

Mark,

Did you see the message at the end? Contact Sangoma coz what you  
trying to install is not free, ie SMG SS7 stack for asterisk.

Install it in tdm voice mode.


Regards,
Mitul Limbani,
Founder & CEO,
Enterux Solutions Pvt Ltd,
The Enterprise Linux Company(r),
Http://www.enterux.com/
(PS: if time is crucial you might as well look for paying some expert  
and get things accomplished)

On 04-Oct-08, at 9:00, "mark morreny" <markmorreny at gmail.com> wrote:

> Hi,
>
> I am getting stuck with trying to get Sangoma 101 to be installed  
> with Wanpipe using SS7.  Could someone please help me?
> Whenever either 4 or 5 is selected, I am getting error saing SS7 is  
> not supported.  Does anyone know how to fix this problem?
>
>
>
>   ----------------------------------------------------------
>                   WANPIPE v2.3.4-16 Installation Script
>             Copyright (c) 1995-2007, Sangoma Technologies Inc.
>         ----------------------------------------------------------
>         Please Select Compilation Mode
> 1. WAN Protocols Support
>        Protocols: Frame Relay, CHDLC, PPP, ATM, X25, ADSL, TDM API
>        Default for: Wan Routing, Data & Voice API devel.
> 2. TDM Voice (Zaptel) Support
>        Protocols: TDMV (Zaptel), TDM API on AFT adatpers.
>        Default for: Asterisk & CallWeaver
> 3. TDM Voice (Zaptel) + WAN Protocol Support
> 4. SMG (SS7) (Default for Asterisk SMG/SS7 install)
>
> 5. SMG (SS7) + TDM Voice (Zaptel)
>        Default for: Asterisk SS7 + PRI
> 6. TDM API
>        Protocols: TDM API on AFT adapters:
>        Default for: FreeSwitch, Yate, Sunrise
>                     Custom voice development
> 7. Custom Compilation Mode
>        Specify protocols to be added into the WANPIPE
>        kernel drivers.
>
>
>
> Please select (1,2,3,4,5,6 or 7) [Default: 1]:5
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /// 
> /////////////////////////////////////////////////////////////////////
>         ----------------------------------------------------------
>                   WANPIPE v2.3.4-16 Installation Script
>             Copyright (c) 1995-2007, Sangoma Technologies Inc.
>         ----------------------------------------------------------
> Installing WANPIPE Device Drivers: Linux KERNEL
> To integrate WANPIPE Multi-Protocol Voice & WAN Router
> modules into the Linux kernel, the kernel has to be
> updated with latest wanpipe sources.  Install will only
> modify existing wanpipe source that is already in the
> Kernel.
> IMPORTANT:
> It is always recommended to say YES to all options
> prompted during the install!
> Would you like build wanpipe kernel drivers? [y] (y/n)
> [root at localhost wanpipe-2.3.4-16]# ./Setup install --protocol=SS7
> WARNING: The SS7 Protocol is not part of this release!
>          Please contact Sangoma Technologies
>          Tel.   905 474 1990 ex113
>          Email: techdesk at sangoma.com
> Press [Enter] to continue...
>
>
>
>
> Thanks in advance for your help.
> Mark
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20081004/877795cb/attachment.htm