[asterisk-ss7] Redundant Server Setup

[Tobias Wolf]

Hi all,

our first libss7 deployment works very well. Now we want to move on and 
add some redundancy to the system. We want to have two asterisk server 
that are connected to one voice switch.

Incoming traffic will be routed over these two links to the servers. 
Every server can make outbound calls. If one link fails, incoming calls 
will only routed to the remaining asterisk. Since it is possible that 
the asterisk on the failed link, is still reachable per IP it should be 
possible to automatically reroute incoming calls to the other asterisk, 
if the ss7 link is down.

Generally: Is this possible with libss7? Should we have two or one 
pointcode for the asterisk server?

I hope i made myself clear. If i slipped some important information 
don't hesitate to ask me, i will gladly provide further information.

Kind Regards,
-- 

   Tobias Wolf

   Leiter Softwareentwicklung / Kommunikationslösungen

   Evision GmbH



   Wittekindstr. 105

   44139 Dortmund

   Tel: +49 (0)231 - 47790 307

   Fax: +49 (0)231 - 47790 500

   http://www.evision.de



This electronic mail transmission and any accompanying attachments
contain confidential information intended only for the use of the
individual or entity named above. Any dissemination, distribution,
copying or action taken in reliance on the contents of this
communication by anyone other than the intended recipient is strictly
prohibited. If you have received this communication in error
please immediately delete the E-mail and notify the sender at the
above E-mail address. Thank you.
Hövener & Trapp Evision GmbH, Dortmund - HRB Nr.12477, Registergericht 
Dortmund - Geschäftsführer Christoph Begall