[asterisk-ss7] installing latest version problems.

[olivier taylor]

/etc/system/dahdi.conf doesn't exist on my server...

Olivier

Matthew Fredrickson a écrit :
> olivier taylor wrote:
>> Okido, it works perfectly again, Thx Matthew, you are the source for 
>> SS7.
> If you're using a Digium card, you might change your dchan= line to 
> mtp2= in /etc/system/dahdi.conf for better signalling channel 
> reliability.
>
> Matthew Fredrickson
>>
>> Best regards,
>>
>> Olivier
>>
>> Matthew Fredrickson a écrit :
>>> olivier taylor wrote:
>>>> Okido, I have then to uninstall zaptel?
>>>>
>>>> For dahdi, it's installed, but I am lost with the configurations 
>>>> files.
>>>> Previously, I had libss7 working (before the need to use dahdi, and 
>>>> had no problems.
>>>>
>>>> Are the zaptel and zapata files similar to dahdi/system.conf and 
>>>> chan_dahdi.conf?
>>>
>>> Exact same syntax should get you up and running. Copy 
>>> /etc/zaptel.conf to /etc/dahdi/system.conf and 
>>> /etc/asterisk/zapata.conf to /etc/asterisk/chan_dahdi.conf.
>>>
>>> Make sure you also are using a fairly recent version of dahdi (I'd 
>>> just update it to latest, unless you checked it out less than a week 
>>> or so ago).
>>>
>>> Matthew Fredrickson
>>>>
>>>> When starting, I have now"chan_dahdi.c:12843 linkset_addsigchan: 
>>>> Invalid networkindicator!"
>>>>
>>>> Also, as dahdi doesn't start, I have no cli commands, are the ss7 
>>>> commands replaced by something?
>>>>
>>>> Kind regards,
>>>>
>>>> Olivier
>>>>
>>>> system.conf :
>>>> span=1,0,0,ccs,hdb3
>>>> bchan=1-15
>>>> dchan=16
>>>> bchan=17-31
>>>>
>>>> chan_dahdi.conf :
>>>> [channels]
>>>> callwaiting=yes
>>>> callwaitingcallerid=yes
>>>> threewaycalling=yes
>>>> transfer=yes
>>>> cancallforward=yes
>>>> callreturn=yes
>>>> echocancel=yes
>>>> echocancelwhenbridged=yes
>>>> group=1
>>>> callgroup=1
>>>> pickupgroup=1
>>>>
>>>> networkindicator=national
>>>>
>>>> ss7_calling_nai=international
>>>> ss7_internationalprefix = 00
>>>> ss7_nationalprefix =
>>>>
>>>>
>>>> signalling = ss7
>>>> ss7type = itu ; or ansi if you are using an ANSI link
>>>>
>>>> linkset = 1 ; Pick a number for your linkset identifier in 
>>>> chan_dahdi.conf
>>>>
>>>> pointcode = 8002
>>>> adjpointcode = 3353
>>>> defaultdpc = 3353
>>>>
>>>> cicbeginswith = 1 ; Number to start counting the CICs from. So if 
>>>> Zap/1 to
>>>> channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15
>>>> cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 
>>>> so we initialize
>>>> ; cicbeginswith to 17 before we declare those channels
>>>> channel = 17-31 ; This assigns CICs 17-31 to channels 17-31
>>>> sigchan = 16 ; This is where you declare which Zap channel is your 
>>>> signalling
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Joseph a écrit :
>>>>> On 08/01/08, olivier taylor wrote:
>>>>>  
>>>>>> Hi all,
>>>>>>
>>>>>> Installed :
>>>>>> dahdi-complete
>>>>>> zaptel 1.4.11
>>>>>> libss7-trunk
>>>>>> When compiling libss7, I get :
>>>>>>
>>>>>> gcc -g -o ss7linktest ss7linktest.c libss7.a -lpthread
>>>>>> ss7linktest.c: In function ‘zap_open’:
>>>>>> ss7linktest.c:200: error: ‘DAHDI_BUFFERINFO’ undeclared (first 
>>>>>> use in
>>>>>> this function)
>>>>>> ss7linktest.c:200: error: (Each undeclared identifier is reported 
>>>>>> only once
>>>>>> ss7linktest.c:200: error: for each function it appears in.)
>>>>>> ss7linktest.c:200: error: expected ‘;’ before ‘bi’
>>>>>> ss7linktest.c:207: error: ‘bi’ undeclared (first use in this 
>>>>>> function)
>>>>>> make: *** [ss7linktest] Error 1
>>>>>>
>>>>>> Any idea of what's wrong?
>>>>>>     
>>>>>
>>>>> You need to use dahdi instead of zaptel.
>>>>>
>>>>>   
>>>>> ------------------------------------------------------------------------ 
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>
>>>>> asterisk-ss7 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>> ------------------------------------------------------------------------ 
>>>>
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>
>>>> asterisk-ss7 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>
>>>
>>
>
>