[asterisk-ss7] installing latest version problems.

[Matthew Fredrickson]

olivier taylor wrote:
> /etc/system/dahdi.conf doesn't exist on my server...

Sorry, I meant /etc/dahdi/system.conf
>
> Olivier
>
> Matthew Fredrickson a écrit :
>> olivier taylor wrote:
>>> Okido, it works perfectly again, Thx Matthew, you are the source for 
>>> SS7.
>> If you're using a Digium card, you might change your dchan= line to 
>> mtp2= in /etc/system/dahdi.conf for better signalling channel 
>> reliability.
>>
>> Matthew Fredrickson
>>>
>>> Best regards,
>>>
>>> Olivier
>>>
>>> Matthew Fredrickson a écrit :
>>>> olivier taylor wrote:
>>>>> Okido, I have then to uninstall zaptel?
>>>>>
>>>>> For dahdi, it's installed, but I am lost with the configurations 
>>>>> files.
>>>>> Previously, I had libss7 working (before the need to use dahdi, 
>>>>> and had no problems.
>>>>>
>>>>> Are the zaptel and zapata files similar to dahdi/system.conf and 
>>>>> chan_dahdi.conf?
>>>>
>>>> Exact same syntax should get you up and running. Copy 
>>>> /etc/zaptel.conf to /etc/dahdi/system.conf and 
>>>> /etc/asterisk/zapata.conf to /etc/asterisk/chan_dahdi.conf.
>>>>
>>>> Make sure you also are using a fairly recent version of dahdi (I'd 
>>>> just update it to latest, unless you checked it out less than a 
>>>> week or so ago).
>>>>
>>>> Matthew Fredrickson
>>>>>
>>>>> When starting, I have now"chan_dahdi.c:12843 linkset_addsigchan: 
>>>>> Invalid networkindicator!"
>>>>>
>>>>> Also, as dahdi doesn't start, I have no cli commands, are the ss7 
>>>>> commands replaced by something?
>>>>>
>>>>> Kind regards,
>>>>>
>>>>> Olivier
>>>>>
>>>>> system.conf :
>>>>> span=1,0,0,ccs,hdb3
>>>>> bchan=1-15
>>>>> dchan=16
>>>>> bchan=17-31
>>>>>
>>>>> chan_dahdi.conf :
>>>>> [channels]
>>>>> callwaiting=yes
>>>>> callwaitingcallerid=yes
>>>>> threewaycalling=yes
>>>>> transfer=yes
>>>>> cancallforward=yes
>>>>> callreturn=yes
>>>>> echocancel=yes
>>>>> echocancelwhenbridged=yes
>>>>> group=1
>>>>> callgroup=1
>>>>> pickupgroup=1
>>>>>
>>>>> networkindicator=national
>>>>>
>>>>> ss7_calling_nai=international
>>>>> ss7_internationalprefix = 00
>>>>> ss7_nationalprefix =
>>>>>
>>>>>
>>>>> signalling = ss7
>>>>> ss7type = itu ; or ansi if you are using an ANSI link
>>>>>
>>>>> linkset = 1 ; Pick a number for your linkset identifier in 
>>>>> chan_dahdi.conf
>>>>>
>>>>> pointcode = 8002
>>>>> adjpointcode = 3353
>>>>> defaultdpc = 3353
>>>>>
>>>>> cicbeginswith = 1 ; Number to start counting the CICs from. So if 
>>>>> Zap/1 to
>>>>> channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15
>>>>> cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 
>>>>> so we initialize
>>>>> ; cicbeginswith to 17 before we declare those channels
>>>>> channel = 17-31 ; This assigns CICs 17-31 to channels 17-31
>>>>> sigchan = 16 ; This is where you declare which Zap channel is your 
>>>>> signalling
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Joseph a écrit :
>>>>>> On 08/01/08, olivier taylor wrote:
>>>>>>  
>>>>>>> Hi all,
>>>>>>>
>>>>>>> Installed :
>>>>>>> dahdi-complete
>>>>>>> zaptel 1.4.11
>>>>>>> libss7-trunk
>>>>>>> When compiling libss7, I get :
>>>>>>>
>>>>>>> gcc -g -o ss7linktest ss7linktest.c libss7.a -lpthread
>>>>>>> ss7linktest.c: In function ‘zap_open’:
>>>>>>> ss7linktest.c:200: error: ‘DAHDI_BUFFERINFO’ undeclared (first 
>>>>>>> use in
>>>>>>> this function)
>>>>>>> ss7linktest.c:200: error: (Each undeclared identifier is 
>>>>>>> reported only once
>>>>>>> ss7linktest.c:200: error: for each function it appears in.)
>>>>>>> ss7linktest.c:200: error: expected ‘;’ before ‘bi’
>>>>>>> ss7linktest.c:207: error: ‘bi’ undeclared (first use in this 
>>>>>>> function)
>>>>>>> make: *** [ss7linktest] Error 1
>>>>>>>
>>>>>>> Any idea of what's wrong?
>>>>>>>     
>>>>>>
>>>>>> You need to use dahdi instead of zaptel.
>>>>>>
>>>>>>   
>>>>>> ------------------------------------------------------------------------ 
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>
>>>>>> asterisk-ss7 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>>> ------------------------------------------------------------------------ 
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>
>>>>> asterisk-ss7 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>>
>>>>
>>>
>>
>>
>