[asterisk-ss7] installing latest version problems.

[olivier taylor]

Okido, it works perfectly again, Thx Matthew, you are the source for SS7.

Best regards,

Olivier

Matthew Fredrickson a écrit :
> olivier taylor wrote:
>> Okido, I have then to uninstall zaptel?
>>
>> For dahdi, it's installed, but I am lost with the configurations files.
>> Previously, I had libss7 working (before the need to use dahdi, and 
>> had no problems.
>>
>> Are the zaptel and zapata files similar to dahdi/system.conf and 
>> chan_dahdi.conf?
>
> Exact same syntax should get you up and running. Copy /etc/zaptel.conf 
> to /etc/dahdi/system.conf and /etc/asterisk/zapata.conf to 
> /etc/asterisk/chan_dahdi.conf.
>
> Make sure you also are using a fairly recent version of dahdi (I'd 
> just update it to latest, unless you checked it out less than a week 
> or so ago).
>
> Matthew Fredrickson
>>
>> When starting, I have now"chan_dahdi.c:12843 linkset_addsigchan: 
>> Invalid networkindicator!"
>>
>> Also, as dahdi doesn't start, I have no cli commands, are the ss7 
>> commands replaced by something?
>>
>> Kind regards,
>>
>> Olivier
>>
>> system.conf :
>> span=1,0,0,ccs,hdb3
>> bchan=1-15
>> dchan=16
>> bchan=17-31
>>
>> chan_dahdi.conf :
>> [channels]
>> callwaiting=yes
>> callwaitingcallerid=yes
>> threewaycalling=yes
>> transfer=yes
>> cancallforward=yes
>> callreturn=yes
>> echocancel=yes
>> echocancelwhenbridged=yes
>> group=1
>> callgroup=1
>> pickupgroup=1
>>
>> networkindicator=national
>>
>> ss7_calling_nai=international
>> ss7_internationalprefix = 00
>> ss7_nationalprefix =
>>
>>
>> signalling = ss7
>> ss7type = itu ; or ansi if you are using an ANSI link
>>
>> linkset = 1 ; Pick a number for your linkset identifier in 
>> chan_dahdi.conf
>>
>> pointcode = 8002
>> adjpointcode = 3353
>> defaultdpc = 3353
>>
>> cicbeginswith = 1 ; Number to start counting the CICs from. So if 
>> Zap/1 to
>> channel=1-15 ; Use Zap/1-15 and assign them to CICs 1-15
>> cicbeginswith = 17 ; Now for Zap/17 to Zap/31, they are CICs 17-31 so 
>> we initialize
>> ; cicbeginswith to 17 before we declare those channels
>> channel = 17-31 ; This assigns CICs 17-31 to channels 17-31
>> sigchan = 16 ; This is where you declare which Zap channel is your 
>> signalling
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Joseph a écrit :
>>> On 08/01/08, olivier taylor wrote:
>>>  
>>>> Hi all,
>>>>
>>>> Installed :
>>>> dahdi-complete
>>>> zaptel 1.4.11
>>>> libss7-trunk
>>>> When compiling libss7, I get :
>>>>
>>>> gcc -g -o ss7linktest ss7linktest.c libss7.a -lpthread
>>>> ss7linktest.c: In function ‘zap_open’:
>>>> ss7linktest.c:200: error: ‘DAHDI_BUFFERINFO’ undeclared (first use in
>>>> this function)
>>>> ss7linktest.c:200: error: (Each undeclared identifier is reported 
>>>> only once
>>>> ss7linktest.c:200: error: for each function it appears in.)
>>>> ss7linktest.c:200: error: expected ‘;’ before ‘bi’
>>>> ss7linktest.c:207: error: ‘bi’ undeclared (first use in this function)
>>>> make: *** [ss7linktest] Error 1
>>>>
>>>> Any idea of what's wrong?
>>>>     
>>>
>>> You need to use dahdi instead of zaptel.
>>>
>>>   
>>> ------------------------------------------------------------------------ 
>>>
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>