[asterisk-ss7] dpc and adjpc

[Eric Huang]

Hi Joseph,
Thanks for hints.

Your hint confirms my configuration. Yes. The defaultdpc node controls
cic trunks. The adjpointcode is the next hop is to get to the
defaultdpc. But I can only see SS7 working in the node with
adjpointcode, but not going to the node with defaultdpc.

I will need to enable debug mode and maybe hook the protocol analyzer if help.

cheers,
/eric

2007/10/15, Joseph <tech at ekn.com>:
> Eric Huang wrote:
> > Hello All,
> > I have to configure different numbers for DPC and Adj  PC. For
> > example, I have to have the following values in zapata.conf.
> > pointcode = 100
> > adjpointcode = 1001
> > defaultdpc = 1000
> >
> > All ss7 goes to 1001, not to 1000. I have checked the code.
> >
> > libss7.h in libss7
> > ss7_set_pc(), ss7_set_adjpc(), ss7_set_default_dpc() are related.
> >
> > but there is not ss7_set_default_dpc function in any C files. My
> > question is how can I make singaling go to PC 1000 and routing it with
> > PC 1001? Missing code there?
>
> You want to make defaultdpc point to the PC that controls your cic
> trunks. Adjpointcode simply means what the next hop is to get to defaultdpc.
>
> I have seen it work even if the adjpointcode is wrong. I am not sure how
> that can be...
>
> --
> ----------------------------+
>  respectfully, Joseph       |
> ----------------------------+
>
>