[asterisk-ss7] libss7 Not aligned

[Mark Pieter]

Thank You all. I made a reset to the modem and It is currently working
perfectly.


On Mon, 2007-12-10 at 12:58 +0500, ZeeJee wrote:
> u have not defined CICs
>  
> define CICs and check
>  
> regards
>  
> 
> 
>  
> On Dec 10, 2007 4:01 AM, mark pieter <mark.pieter75 at gmail.com> wrote:
> 
>         Hi all,
>         
>         I am new to libss7. I have downloaded the trunk versions for
>         asterisk and libss7 and successfully compiled and installed
>         them on CentOS 5. 
>         
>         The following is my zapata.conf file:
>         ------------------------------------------------------------------------------------------ 
>         [channels]
>         context=default
>         signalling = ss7
>         ss7type = itu
>         linkset = 1 
>         pointcode = 1085
>         adjpointcode = 2132
>         defaultdpc = 2132
>         networkindicator=national
>         sigchan = 1
>         cicbeginswith = 
>         channel = 2-31 
>         ------------------------------------------------------------------------------------------ 
>         
>         
>         The following is my zaptel.conf file :
>         ------------------------------------------------------------------------------------------ 
>         # Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0"
>         span=1,1,0,ccs,hdb3 
>         
>         bchan=2-31
>         dchan=1
>         
>         loadzone        = us
>         defaultzone     = us
>         ------------------------------------------------------------------------------------------ 
>         
>         
>         I verified the above mentioned configuration with my service
>         provided more than once and tested the link with another
>         system (dialogic) with the same settings and it is up and
>         receiving calls 
>         
>         Here is the output of: ss7 show linkset 1 
>         SS7 linkset 1 status: Down
>         
>         when I enabled debugging of ss7 I just see the following
>         messages displayed on the console:
>         
>         Link state change: IDLE -> NOTALIGNED 
>         Link state change: NOTALIGNED -> IDLE 
>         Link state change: IDLE -> NOTALIGNED
>         Link state change: NOTALIGNED -> IDLE
>         Link state change: IDLE -> NOTALIGNED
>         Link state change: NOTALIGNED -> IDLE 
>         Link state change: IDLE -> NOTALIGNED
>         Link state change: NOTALIGNED -> IDLE
>         Link state change: IDLE -> NOTALIGNED
>         Link state change: NOTALIGNED -> IDLE
>         
>         
>         Is there anyway to know to increase the debugging level so I
>         can see what is going on behind the scenes ? 
>         
>         Any help will be appreciated.
>         
>         _______________________________________________
>         --Bandwidth and Colocation Provided by
>         http://www.api-digital.com-- 
>         
>         asterisk-ss7 mailing list
>         To UNSUBSCRIBE or update options visit:
>           http://lists.digium.com/mailman/listinfo/asterisk-ss7
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20071210/16cedbbb/attachment-0001.htm