[asterisk-ss7] libss7 Not aligned

[ZeeJee]

u have not defined CICs

define CICs and check

regards




On Dec 10, 2007 4:01 AM, mark pieter <mark.pieter75 at gmail.com> wrote:

> Hi all,
>
> I am new to libss7. I have downloaded the trunk versions for asterisk and
> libss7 and successfully compiled and installed them on CentOS 5.
>
> The following is my zapata.conf file:
> ------------------------------------------------------------------------------------------
>
> [channels]
> context=default
> signalling = ss7
> ss7type = itu
> linkset = 1
> pointcode = 1085
> adjpointcode = 2132
> defaultdpc = 2132
> networkindicator=national
> sigchan = 1
> cicbeginswith =
> channel = 2-31
>
> ------------------------------------------------------------------------------------------
>
>
> The following is my zaptel.conf file :
> ------------------------------------------------------------------------------------------
>
> # Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0"
> span=1,1,0,ccs,hdb3
>
> bchan=2-31
> dchan=1
>
> loadzone        = us
> defaultzone     = us
> ------------------------------------------------------------------------------------------
>
>
>
> I verified the above mentioned configuration with my service provided more
> than once and tested the link with another system (dialogic) with the same
> settings and it is up and receiving calls
>
> Here is the output of: ss7 show linkset 1
> SS7 linkset 1 status: Down
>
> when I enabled debugging of ss7 I just see the following messages
> displayed on the console:
>
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
>
>
> Is there anyway to know to increase the debugging level so I can see what
> is going on behind the scenes ?
>
> Any help will be appreciated.
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20071210/8bc6ad31/attachment.htm