[asterisk-ss7] how to install Asterisk-ss7 & libss7

Fri Sep 29 11:49:48 MST 2006

Dear sir,
             If you dont mind can u please give me a sample conf file like
what Chanss7 people give in their list If u can add somthing like that .So
that it will be easy for many to try this new development.

regards
surender


On 29/09/06, Matthew Fredrickson <creslin at digium.com> wrote:
>
> It looks like you're trying to terminate 2 linksets on one machine.
> Just set it up so that you have two linksets in zapata.conf.  You can't
> do comma separation for your sigchan and defaultdpc.  You have to
> declare those one at a time.  Also, your zaptel.conf needs to have your
> signalling channel set to be dchan (or hardhdlc if you're using a card
> that supports it).
>
> Matthew Fredrickson
>
> On Sep 29, 2006, at 3:09 AM, Mr.Surender Reddy wrote:
>
> > Dear Matthew,
> > I Thankx for our Intrest to help me out in
> > this.Below are the Details which iam using for Chanss7 .But i want to
> > try Libss7 Please help me out.
> >
> > ss7.conf of Chanss7
> >
> >
> >
> > [linkset-Ts1]
> >
> > enabled => yes
> >
> > enable_st => yes
> >
> > use_connect => yes
> >
> > hunting_policy => seq_htl
> >
> > context => ss7
> >
> > subservice => 8
> >
> > [linkset-Ts2]
> >
> > enabled => yes
> >
> > enable_st => yes
> >
> > use_connect =>yes
> >
> > hunting_policy => seq_htl
> >
> > context => ss7
> >
> > subservice => 8
> >
> > [link-l1]
> >
> > linkset => Ts1
> >
> > channels => 1-15,17-31
> >
> > schannel => 16
> >
> > firstcic => 1
> >
> > enabled => yes
> >
> > [link-l2]
> >
> > linkset => Ts1
> >
> > channels => 1-31
> >
> > schannel =>
> >
> > firstcic => 33
> >
> > enabled => YES
> >
> > [link-l3]
> >
> > linkset => Ts2
> >
> > channels =>1-15,17-31
> >
> > schannel => 16
> >
> > firstcic => 1
> >
> > enabled => yes
> >
> > [link-l4]
> >
> > linkset => Ts2
> >
> > channels => 1-31
> >
> > schannel =>
> >
> > firstcic => 33
> >
> > enabled => YES
> >
> > [host-localhost.localdomain]
> >
> > enabled => yes
> >
> > default_linkset => Ts2
> >
> > opc => 124
> >
> > dpc => Ts1:31,Ts2:32
> >
> > links => l1:1,l2:2,l3:3,l4:4
> > This is the zaptel.conf
> >
> >
> >
> > span=1,0,0,ccs,hdb3
> >
> > bchan = 1-31
> >
> > span=2,0,0,ccs,hdb3
> >
> > bchan=32-62
> >
> > span=3,0,0,ccs,hdb3
> >
> > bchan=63-93
> >
> > span=4,1,0,ccs,hdb3
> >
> > bchan=94-124
> >
> >
> > loadzone = us
> >
> > defaultzone = us
> > I have compiled the Libss7 and tried to use that but iam unable to use
> > that as Zapta.conf i couldnt configure fine i tired this way i dont
> > think that is correct Can u please see this Zapta.conf which i wanted
> > to use for libss7
> >
> >
> > Signaling type SS7
> > signalling = ss7
> >
> > ; Variant of SS7 signaling:
> > ; Options are itu and ansi
> > ss7type = itu
> >
> > ; All settings apply to linkset 1
> > linkset = 1
> >
> > ; Point code of the linkset
> > pointcode = 124
> >
> > ; Point code of node adjacent to this signaling link (Possibly the STP
> > between you and
> > ; your destination)
> > adjpointcode = 31,32
> >
> > ; Default point code that you would like to assign to outgoing
> > messages (in case of
> > ; routing through STPs, or using A links)
> > defaultdpc = 31,32
> >
> > ; Begin CIC (Circuit indication codes) count with this number
> > cicbeginswith = 1
> >
> > ; What the MTP3 network indicator bits should be set to. Choices are
> > ; national, national_spare, international, international_spare
> > networkindicator=national
> >
> > ; First signaling channel
> > sigchan = 16
> >
> > ; Channels to associate with CICs on this linkset
> > channel = 25-47
> > regards
> > surender
> >
> >
> > On 28/09/06, Matthew Fredrickson <creslin at digium.com> wrote: What is
> > the layout of your spans (which channel is the signalling
> >> channel on) and what is your layout of your CICs ( i.e. what channels
> >> map to which CICs).After you find that out post your zaptel.conf and
> >> zapata.conf and we'll see if we can sort it out.
> >>
> >> Matthew Fredrickson
> >>
> >> On Sep 28, 2006, at 1:49 AM, Mr.Surender Reddy wrote:
> >>
> >> > HI Matthew,
> >> > Iam using Chanss7 i would like to test Libss7 iam
> >> > unable to configure my SS7 channels with this version I have two ss7
> >> > Links i would like to test both on this machine.How can i do this
> >> can
> >> > u please guide me if u dont mind.
> >> >
> >> > regards
> >> > surender
> >> >
> >> >
> >> > On 27/09/06, Matthew Fredrickson <creslin at digium.com> wrote:
> >> >> On Sep 26, 2006, at 9:44 PM, Rob Hillis wrote:
> >> >>
> >> >> >> Also, you may want to get asterisk trunk as well, since
> >> >> >> that I merged in all the libss7 changes from the asterisk-ss7
> >> >> branch
> >> >> >> into asterisk-trunk. (svn co
> >> >> http://svn.digium.com/svn/asterisk/trunk
> >> >>>> asterisk-trunk)
> >> >> >
> >> >> >
> >> >> > So does this mean that the asterisk-ss7 branch is no longer under
> >> >> > development and all future changes are going to be made to the
> >> >> Asterisk
> >> >> > trunk?Should I be looking at moving from the asterisk-ss7 branch
> >> >> to
> >> >> > the
> >>  >> > main asterisk trunk?
> >> >>
> >> >> For the time being, yes, that would probably be a good idea.I think
> >> >> I
> >> >> may re-branch the asterisk-ss7 branch whenever the 1.4 release
> >> comes
> >> >> out though and backport the changes in trunk to the 1.4 based ss7
> >> >> branch.
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation provided by Easynews.com --
> >>
> >> asterisk-ss7 mailing list
> >> To UNSUBSCRIBE or update options visit:
> >> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20060929/b4128321/attachment-0001.htm