[asterisk-ss7] how to install Asterisk-ss7 & libss7

umar tarar umar.tarar at gmail.com
Tue Oct 17 01:00:00 MST 2006 

well Mr. Wasim, thanx for ur concern, i think my next message did'nt get
posted prior you responded my previouse one, i acknowladged my stupidity in
that post
and i do agree with ur statement "...instead of the developers spending time
with basic info questions we need them to be concentrating on MUCH more
crtiical things...", i've read alot abt SS7 on the internet n still have
been reading, i m sorry for the imperession that you've got from my 3rd-last
post, i.e. it looked quite obviouse from that that i was not aware of the
ss7 basics as u found me asking abt 'adjpointcode=' (but infact i knew what
it was for with the incorrect form i.e. 'djpointcode=') so i ack my
mistake/ignorance. one

two. as libss7 is under development, & not been released yet and i am in an
urgent need to install it thats y i cannot find any other source of help or
info for libss7 issues batter than the developer i think (as it is still
under development, i repeat)...besides i always try be very brief ...anywayz
i'll more carefull next time....& Mr. Wasim! i'll catch u for sure 2 seek
help




On 10/17/06, Wasim Baig <wasim at convergence.com.pk> wrote:
>
> apc is for the "next hop router" on an ss7 network, its what your sp talks
> to ...
>
> umar, it is my recommendation that you read up on ss7 on google ...
>
> i'm sure you'll agree that instead of the developers spending time with
> basic info questions
> we need them to be concentrating on MUCH more crtiical things,
>
> ss7 is not trivial in the best of worlds and we're just starting out here
> with it ...
>
> i'm available on IRC and otherwise if you need basic guidance at anytime
>
> -wasim
>
> On 10/17/06, umar tarar <umar.tarar at gmail.com> wrote:
> >
> > well yes it was a copy/paste error, but i think i should correct the 2nd
> > entry of 'djpointcode=' to 'defaultdpc=' rather than 'adjpointcode=', or if
> > i am wrong then plz describe to me what is 'adjpointcode=' for? (by the way,
> > tell me about 'adjpointcode=' anyway)
> >
> > On 10/17/06, Matt Fredrickson <creslin at digium.com > wrote:
> > >
> > > First of all, it looks like you are either loading chan_zap.so twice,
> > > or you have something else that has tried to open the zap channels (maybe
> > > chan_ss7.so?).  So you need to get that straightened out.  I would remove
> > > the contents of /usr/lib/asterisk/modules and do a make install from your
> > > asterisk-trunk directory again.  Second, your lines in your
> > > zapata.conf that are supposed to be adjpointcode= look like they are
> > > set to djpointcode= instead (Unless that was a copy/paste error).  That
> > > would be the reason it is failing at that point.
> > >
> > > Matthew Fredrickson
> > >
> > > ----- umar tarar <umar.tarar at gmail.com> wrote:
> > > > yes u r right, & i myself had discovered this prob, & i infact
> > > posted
> > > > two further posts after the one that u(Matt.) responded, but don't
> > > > know y did'nt those two posts get on to the asterisk-ss7 lists right
> > > > after my previouse post. ok here r those:
> > > >
> > > > ############post-1############
> > > > lately i've discovered that after compiling asterisk-trunk, i dont
> > > > have any chan_zap.so file in my /usr/lib/asterisk/modules/, that is
> > > y
> > > > asterisk while running is unable to load the chan_zap.so & because
> > > of
> > > > it, it do not do anything about zap, ....am i right?
> > > > if yes then what should i do to correctly compile the asterisk-trunk
> > > > to get the chan_zap.so (i already have tried make & make install
> > > twice
> > > > but did'nt get chan_zap.so both times in my
> > > > /usr/lib/asterisk/modules/, though chan_zap.c is present in
> > > > asterisk-trunk folder)
> > > > #############################
> > > >
> > > > ###########post-2#############
> > > > okay Matt.! now some how after fixing that chan_zap.so prob (by
> > > > rechecking once again all the three packages), now when i run the
> > > > asterisk with forcefully loading the chan_zap.so modules by loading
> > > it
> > > > into modules.conf , it gives the following error about djpointcode &
> > > > sigchan as;
> > > >
> > > > ------------CLI eror log-----------------
> > > > .
> > > > .
> > > > [ Oct 14 07:28:18 ] NOTICE[4070]: loader.c:793 load_modules: 1
> > > modules
> > > > will be loaded.
> > > > == Registered application 'ZapSendKeypadFacility'
> > > > == Parsing '/etc/asterisk/zapata.conf': Found
> > > > [ Oct 14 07:28:18 ] ERROR[4070]: chan_zap.c:11272
> > > linkset_addsigchan:
> > > > Unspecified adjpointcode!
> > > > .
> > > > .
> > > > .
> > > > res_features.so => (Call Features Resource)
> > > > == Parsing '/etc/asterisk/smdi.conf': Found
> > > > [ Oct 14 07:28:18 ] WARNING[4070]: res_smdi.c:726 load_module: No
> > > SMDI
> > > > interfaces are available to listen on, not starting SDMI listener.
> > > > [ Oct 14 07:28:18 ] WARNING[4070]: pbx.c:2818
> > > > ast_register_application: Already have an application
> > > > 'ZapSendKeypadFacility'
> > > > == Parsing '/etc/asterisk/zapata.conf': Found
> > > > [ Oct 14 07:28:18 ] ERROR[4070]: chan_zap.c:11222
> > > linkset_addsigchan:
> > > > Unable to open SS7 sigchan 16 (Device or resource busy)
> > > > .
> > > > .
> > > > .
> > > > ----------------------------------------------
> > > >
> > > > and here r my zapata.conf & zaptel.conf
> > > >
> > > > -----------------zapata.conf--------------
> > > > channels]
> > > > context=zapIncoming
> > > > switchtype=euroisdn
> > > > usecallerid=yes
> > > > hidecallerid=no
> > > > echocancel=yes
> > > > echocancelwhenbridged=yes
> > > > musiconhold=default
> > > >
> > > > signalling = ss7
> > > > ss7type = itu
> > > >
> > > > linkset = 1
> > > >
> > > > ;pointcode = 0x1680
> > > > pointcode = 05760
> > > >
> > > > ;djpointcode = 0x168a
> > > > djpointcode = 05770
> > > > ;djpointcode = 05-10-10
> > > >
> > > > ;defaultdpc = 0x168a
> > > > djpointcode = 05770
> > > > ;defaultdpc = 05-10-10
> > > >
> > > > networkindicator=national
> > > > cicbeginswith = 1
> > > > sigchan = 16 ; First signaling channel
> > > > channel=>1-15,17-31
> > > >
> > > > ;channel=>1-15
> > > > ;cicbeginswith=17
> > > > ;channel=>17-31
> > > > -----------------------------------------------
> > > >
> > > > ---------------zaptel.conf-----------------
> > > > pan=1,1,0,ccs,hdb3
> > > > bchan=1-15,17-31
> > > > dchan=16
> > > > -----------------------------------------------
> > > >
> > > > now i think the problem is quite identified, so plz suggest me what
> > > > should i do to solve this
> > > > #############################
> > > >
> > > > so plz now respond according to having these two posts right after
> > > my
> > > > previous post (in which i've already mentioned, what the CLI error
> > > log
> > > > says abt zap --- keep in mind that chan_zap.so did'nt load
> > > > autometically rather i forcefully loaded it through 'load' command
> > > in
> > > > modules.conf)
> > > >
> > > > waitin for the responces
> > > >
> > > >
> > > >
> > > > On 10/14/06 , Matt Fredrickson < creslin at digium.com > wrote: It
> > > sounds
> > > > like chan_zap.so didn't load... You need to look at what happens
> > > when
> > > > you load asterisk, to see why chan_zap.so is not loading.
> > > >
> > > > Matthew Fredrickson
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > >
> >
> >
> >
> > --
> >         |__\__/__|   /__/ \__\   |__| \__|
> >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> >
> >
>
>
> --
> wasim h. baig | principal consultant | convergence pk | +92(300)8508070
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>


-- 
        |__\__/__|   /__/ \__\   |__| \__|
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20061017/d8caab8a/attachment-0001.htm

More information about the asterisk-ss7 mailing list