well Mr. Wasim, thanx for ur concern, i think my next message did'nt get posted prior you responded my previouse one, i acknowladged my stupidity in that post<br>and i do agree with ur statement "...instead of the developers spending time with basic info questions we need them to be concentrating on MUCH more crtiical things...", i've read alot abt SS7 on the internet n still have been reading, i m sorry for the imperession that you've got from my 3rd-last post,
i.e. it looked quite obviouse from that that i was not aware of the ss7 basics as u found me asking abt 'adjpointcode=' (but infact i knew what it was for with the incorrect form i.e. 'djpointcode=') so i ack my mistake/ignorance. one
<br><br>two. as libss7 is under development, & not been released yet and i am in an urgent need to install it thats y i cannot find any other source of help or info for libss7 issues batter than the developer i think (as it is still under development, i repeat)...besides i always try be very brief ...anywayz i'll more carefull next time....& Mr. Wasim! i'll catch u for sure 2 seek help
<br><br><br><br><br><div><span class="gmail_quote">On 10/17/06, <b class="gmail_sendername">Wasim Baig</b> <<a href="mailto:wasim@convergence.com.pk">wasim@convergence.com.pk</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
apc is for the "next hop router" on an ss7 network, its what your sp talks to ...<br><br>umar, it is my recommendation that you read up on ss7 on google ...<br><br>i'm sure you'll agree that instead of the developers spending time with basic info questions
<br>we need them to be concentrating on MUCH more crtiical things, <br><br>ss7 is not trivial in the best of worlds and we're just starting out here with it ...<br><br>i'm available on IRC and otherwise if you need basic guidance at anytime
<br><span class="sg"><br>-wasim</span><div><span class="e" id="q_10e553301412ccba_2"><br><br><div><span class="gmail_quote">On 10/17/06, <b class="gmail_sendername">umar tarar</b> <<a href="mailto:umar.tarar@gmail.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
umar.tarar@gmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
well yes it was a copy/paste error, but i think i should correct the 2nd entry of 'djpointcode=' to 'defaultdpc=' rather than 'adjpointcode=', or if i am wrong then plz describe to me what is 'adjpointcode=' for? (by the way, tell me about 'adjpointcode=' anyway)
<br><br><div><span class="gmail_quote">On 10/17/06, <b class="gmail_sendername">Matt Fredrickson</b> <<a href="mailto:creslin@digium.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">creslin@digium.com
</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
First of all, it looks like you are either loading chan_zap.so twice, or you have something else that has tried to open the zap channels (maybe chan_ss7.so?). So you need to get that straightened out. I would remove the contents of /usr/lib/asterisk/modules and do a make install from your asterisk-trunk directory again. Second, your lines in your
zapata.conf that are supposed to be adjpointcode= look like they are set to djpointcode= instead (Unless that was a copy/paste error). That would be the reason it is failing at that point.<br><br>Matthew Fredrickson<br>
<br>
----- umar tarar <<a href="mailto:umar.tarar@gmail.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">umar.tarar@gmail.com</a>> wrote:<br>> yes u r right, & i myself had discovered this prob, & i infact posted
<br>> two further posts after the one that u(Matt.) responded, but don't
<br>> know y did'nt those two posts get on to the asterisk-ss7 lists right<br>> after my previouse post. ok here r those:<br>><br>> ############post-1############<br>> lately i've discovered that after compiling asterisk-trunk, i dont
<br>> have any chan_zap.so file in my /usr/lib/asterisk/modules/, that is y<br>> asterisk while running is unable to load the chan_zap.so & because of<br>> it, it do not do anything about zap, ....am i right?
<br>> if yes then what should i do to correctly compile the asterisk-trunk<br>> to get the chan_zap.so (i already have tried make & make install twice<br>> but did'nt get chan_zap.so both times in my<br>> /usr/lib/asterisk/modules/, though chan_zap.c is present in
<br>> asterisk-trunk folder)<br>> #############################<br>><br>> ###########post-2#############<br>> okay Matt.! now some how after fixing that chan_zap.so prob (by<br>> rechecking once again all the three packages), now when i run the
<br>> asterisk with forcefully loading the chan_zap.so modules by loading it<br>> into modules.conf , it gives the following error about djpointcode &<br>> sigchan as;<br>><br>> ------------CLI eror log-----------------
<br>> .<br>> .<br>> [ Oct 14 07:28:18 ] NOTICE[4070]: loader.c:793 load_modules: 1 modules<br>> will be loaded.<br>> == Registered application 'ZapSendKeypadFacility'<br>> == Parsing '/etc/asterisk/zapata.conf': Found
<br>> [ Oct 14 07:28:18 ] ERROR[4070]: chan_zap.c:11272 linkset_addsigchan:<br>> Unspecified adjpointcode!<br>> .<br>> .<br>> .<br>> res_features.so => (Call Features Resource)<br>> == Parsing '/etc/asterisk/smdi.conf': Found
<br>> [ Oct 14 07:28:18 ] WARNING[4070]: res_smdi.c:726 load_module: No SMDI<br>> interfaces are available to listen on, not starting SDMI listener.<br>> [ Oct 14 07:28:18 ] WARNING[4070]: pbx.c:2818<br>> ast_register_application: Already have an application
<br>> 'ZapSendKeypadFacility'<br>> == Parsing '/etc/asterisk/zapata.conf': Found<br>> [ Oct 14 07:28:18 ] ERROR[4070]: chan_zap.c:11222 linkset_addsigchan:<br>> Unable to open SS7 sigchan 16 (Device or resource busy)
<br>> .<br>> .<br>> .<br>> ----------------------------------------------<br>><br>> and here r my zapata.conf & zaptel.conf<br>><br>> -----------------zapata.conf--------------<br>> channels]
<br>> context=zapIncoming<br>> switchtype=euroisdn<br>> usecallerid=yes<br>> hidecallerid=no<br>> echocancel=yes<br>> echocancelwhenbridged=yes<br>> musiconhold=default<br>><br>> signalling = ss7
<br>> ss7type = itu<br>><br>> linkset = 1<br>><br>> ;pointcode = 0x1680<br>> pointcode = 05760<br>><br>> ;djpointcode = 0x168a<br>> djpointcode = 05770<br>> ;djpointcode = 05-10-10<br>><br>
> ;defaultdpc = 0x168a<br>> djpointcode = 05770<br>> ;defaultdpc = 05-10-10<br>><br>> networkindicator=national<br>> cicbeginswith = 1<br>> sigchan = 16 ; First signaling channel<br>> channel=>1-15,17-31
<br>><br>> ;channel=>1-15<br>> ;cicbeginswith=17<br>> ;channel=>17-31<br>> -----------------------------------------------<br>><br>> ---------------zaptel.conf-----------------<br>> pan=1,1,0,ccs,hdb3
<br>> bchan=1-15,17-31<br>> dchan=16<br>> -----------------------------------------------<br>><br>> now i think the problem is quite identified, so plz suggest me what<br>> should i do to solve this<br>
> #############################
<br>><br>> so plz now respond according to having these two posts right after my<br>> previous post (in which i've already mentioned, what the CLI error log<br>> says abt zap --- keep in mind that chan_zap.so did'nt load
<br>> autometically rather i forcefully loaded it through 'load' command in<br>> modules.conf)<br>><br>> waitin for the responces<br>><br>><br>><br>> On 10/14/06 , Matt Fredrickson < <a href="mailto:creslin@digium.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
creslin@digium.com</a> > wrote: It sounds<br>> like chan_zap.so didn't load... You need to look at what happens when<br>> you load asterisk, to see why chan_zap.so is not loading.<br>><br>> Matthew Fredrickson
<br><br>_______________________________________________<br>--Bandwidth and Colocation provided by <a href="http://Easynews.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">Easynews.com</a> --<br>
<br>asterisk-ss7 mailing list<br>To UNSUBSCRIBE or update options visit:
<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br></blockquote></div>
<span><br><br clear="all"><br>-- <br> |__\__/__| /__/ \__\ |__| \__|
<br><br><br>
</span><br>_______________________________________________<br>--Bandwidth and Colocation provided by <a href="http://Easynews.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">Easynews.com</a> --
<br><br>asterisk-ss7 mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">http://lists.digium.com/mailman/listinfo/asterisk-ss7
</a><br><br><br></blockquote></div><br><br clear="all"><br>-- <br></span></div><div><span class="e" id="q_10e553301412ccba_3">wasim h. baig | principal consultant | convergence pk | +92(300)8508070
</span></div><br>_______________________________________________<br>--Bandwidth and Colocation provided by <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://Easynews.com" target="_blank">Easynews.com
</a> --<br><br>asterisk-ss7 mailing list<br>To UNSUBSCRIBE or update options visit:<br> <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://lists.digium.com/mailman/listinfo/asterisk-ss7" target="_blank">
http://lists.digium.com/mailman/listinfo/asterisk-ss7</a><br><br><br></blockquote></div><br><br clear="all"><br>-- <br> |__\__/__| /__/ \__\ |__| \__|<br><br><br>