[asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO

Mc GRATH Ricardo mcgrathr at mail2web.com
Wed Feb 22 12:18:49 CST 2012 

Carlos

I probably sure problem it becomes from the rule setting on dialplan that you have assign, just in case of your settings of " .," is not a good setting it mean Asterisk can dial one or more digits, by the way  it can causes great potential to cause problems, these last is not from me.
So I have an idea to test dialplan  if working properly.
Could assign context [salida] to one Asterisk SIP device and use for test of dialplan rules?
By the other way I change salida rules to the following, it should work.
[salida]
exten => _x.,1,Progress()
exten => _X.,n,Dial(DAHDI/g1/${EXTEN})

Try it and let me know the test result

Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>

________________________________
From: asterisk-r2-bounces at lists.digium.com [asterisk-r2-bounces at lists.digium.com] On Behalf Of Carlos Rodriguez Alcala [carlos.rav at gmail.com]
Sent: 22 February 2012 11:50
To: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO

Ok I will set asterisk -vvvr !! :D
For now there´s no way, I´ll ask for PBX tech, But If I connect directly TELCO-PBX works well.

2012/2/22 Mc GRATH Ricardo <mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>>
Thanks

Well how about to set core set verbose 3 to see what's  going on when call is performing?
No way to get a trace from Nortel?

Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>

________________________________
From: asterisk-r2-bounces at lists.digium.com<mailto:asterisk-r2-bounces at lists.digium.com> [asterisk-r2-bounces at lists.digium.com<mailto:asterisk-r2-bounces at lists.digium.com>] On Behalf Of Carlos Rodriguez Alcala [carlos.rav at gmail.com<mailto:carlos.rav at gmail.com>]
Sent: 22 February 2012 11:08

To: asterisk-r2 at lists.digium.com<mailto:asterisk-r2 at lists.digium.com>
Subject: Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO

Hi Ricardo,


I have a digium card with 2 E1, I want to record the calls, so I have  PBX ----E1 ----Elastix-----E1 ---- TELCO.
As you can see in my chan_dahdi.conf:
context= salida

and

extensions.conf

[salida]
exten => .,1,Answer
exten => .,2,set(calltime=${STRFTIME(${EPOCH},,%C%y-%m-%d--%H\:%M\:%S)})
exten => .,3,MixMonitor(E_${calltime}_from_${CALLERID(num)}to__${EXTEN}.wav)
exten => .,n,Dial(DAHDI/g1/${EXTEN})
exten => h,1,Hangup



2012/2/22 Mc GRATH Ricardo <mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>>
Hi

What kind of connection you have between PBX (nortel) to Asterisk?
If a E1 could you get a trace from Nortel to Asterisk?
It probably you have to review your dialplan for call rerouting from external device via Asterisk, it will help to get trace from external device from Asterisk to let you know the call disconnection cause.
Best regards

Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>

________________________________
From: asterisk-r2-bounces at lists.digium.com<mailto:asterisk-r2-bounces at lists.digium.com> [asterisk-r2-bounces at lists.digium.com<mailto:asterisk-r2-bounces at lists.digium.com>] On Behalf Of omar ivan perez vargas [o_i_p_v at hotmail.com<mailto:o_i_p_v at hotmail.com>]
Sent: 22 February 2012 09:40
To: asterisk-r2 at lists.digium.com<mailto:asterisk-r2 at lists.digium.com>
Subject: Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO

Q mas...
y puedes llamar de la PBX a un softphone?
y puedes llamar de la TELCO a un softphone?
Si es asi me imagino q dentro del asterisk para cada uno tienes creado una TRONCAL y ademas has de tener para cada uno una ruta de entrada.
tambien has de tener una ruta de salida a cada uno, evidentemente cada uno a de manejar extensiones con numeraciones diferentes...
Ej

TELCO con numeracion 2XXX
PBX con numeracion 3XXX

en la ruta de salida le dices q las marcaciones a:
TELCO las permita solo a 2XXX
PBX las permita solo a 3XXX

Hasta aca los softphone pueden llamar

Ahora dentro del elastix tienes q crear en la opion
Misc Destination

Description:

2XXX

Dial:

2XXX

despues le das sumit

lo mismo para la TELCO
Misc Destination

Description:

3XXX

Dial:

3XXX

despues le das sumit

Esa seria la forma grafica, porq tambien lo puedes hacer por comandos en el archivo extension_custom
colocando algo como:


exten=>_2XXX,1,Dial(TRONCAL-TELCO/${EXTEN})

exten=>_2XXX,N,Hangup

exten=>_3XXX,1,Dial(TRONCAL-PBX/${EXTEN})

exten=>_3XXX,N,Hangup


OP

________________________________
Date: Wed, 22 Feb 2012 09:16:49 -0300
From: carlos.rav at gmail.com<mailto:carlos.rav at gmail.com>
To: asterisk-r2 at lists.digium.com<mailto:asterisk-r2 at lists.digium.com>
Subject: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO

Hola/Hi all,

I´m tryng to configure this : TELCO(named COPACO from Paraguay)---asterisk(elastix)--- PBX(Nortel)

I can make calls:
 - from TELCO to PBX
 - from a sipphone to TELCO (through E1)
 - from a sipphone to PBX (through de second E1)


My problem:

- I can´t make call from PBX to TELCO  :(

Can someone help me?

Thanks in advance
(I really look at google or the before writte here!!!)


mis config files son:
#####################
chan_dahdi.conf
; Auto-generated by /usr/sbin/hardware_detector
[trunkgroups]
[channels]
language=es
context=entrada
signalling=fxs_ks
rxwink=300              ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callerid=asreceived
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1

#include dahdi-channels.conf
#include chan_dahdi_additional.conf

#################
dahdi-channels.conf
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
group=1
context=entrada
;switchtype = euroisdn
signalling =mfcr2
mfcr2_variant=itu
mfcr2_get_ani_first=no
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_call_files=yes
mfcr2_logging=all
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
mfcr2_allow_collect_calls=yes
mfcr2_double_answer=no
mfcr2_forced_release=no
mfcr2_charge_calls=yes
channel => 1-15,17-31
context = default

; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
mfcr2_skip_category=yes
group=2
;switchtype = euroisdn
signalling =mfcr2
mfcr2_variant=itu
mfcr2_get_ani_first=no
mfcr2_max_ani=4
mfcr2_max_dnis=7
callerid=asreceived
mfcr2_category=national_priority_subscribe
mfcr2_logdir=span1
mfcr2_call_files=yes
mfcr2_logging=all
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
mfcr2_allow_collect_calls=no
mfcr2_double_answer=no
mfcr2_forced_release=no
mfcr2_charge_calls=yes
mfcr2_skip_category=no
callerid=asreceived
context=salida
channel => 32-46,48-62


extensions.conf
[salida]
exten => .,1,Answer
exten => .,2,set(calltime=${STRFTIME(${EPOCH},,%C%y-%m-%d--%H\:%M\:%S)})
exten => .,3,MixMonitor(E_${calltime}_from_${CALLERID(num)}to__${EXTEN}.wav)
exten => .,n,Dial(DAHDI/g1/${EXTEN})
exten => h,1,Hangup

[entrada]
exten =>  _XXX,1,Answer
exten =>  _XXX,n,set(calltime=${STRFTIME(${EPOCH},,%C%y-%m-%d--%H\:%M\:%S)})
exten =>  _XXX,n,MixMonitor(E_${calltime}_from_${CALLERID(num)}to__${EXTEN}.wav)
exten =>  _XXX,n,Dial(DAHDI/g2/${EXTEN})
;para sipphone
exten => _9.,1,Answer
exten => _9.,2,set(calltime=${STRFTIME(${EPOCH},,%C%y-%m-%d--%H\:%M\:%S)})
exten =>_9.,3,MixMonitor(E_${calltime}_from_${CALLERID(num)}to__${EXTEN}.wav)
exten => _9.,n,Dial(DAHDI/g1/${EXTEN:1})


Tambien adjunto un log de una llamada al numero de seis digitos 390109
cat chan-33-backward-0-20120221222123.call
[22:21:23:536] [Thread: 3073817488] [Chan 33] - Call started at Tue Feb 21 22:21:23 2012 on chan 33 [openr2 version 1.3.1, revision exported]
[22:21:23:536] [Thread: 3073817488] [Chan 33] - Initialized R2 MF detector
[22:21:23:536] [Thread: 3073817488] [Chan 33] - CAS Tx >> [SEIZE ACK] 0x0C
[22:21:23:536] [Thread: 3073817488] [Chan 33] - CAS Raw Tx >> 0x0D
[22:21:23:779] [Thread: 3073817488] [Chan 33] - MF Rx << 3 [ON]
[22:21:23:779] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer timer 0
[22:21:23:779] [Thread: 3073817488] [Chan 33] - Cannot cancel timer 0
[22:21:23:779] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 3
[22:21:23:779] [Thread: 3073817488] [Chan 33] - DNIS so far: 3, expected length: 7
[22:21:23:779] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with signal 0x31.
[22:21:23:779] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
[22:21:23:779] [Thread: 3073817488] [Chan 33] - scheduled timer id 2 (mf_back_cycle)
[22:21:23:839] [Thread: 3073817488] [Chan 33] - MF Rx << 3 [OFF]
[22:21:23:839] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
[22:21:23:919] [Thread: 3073817488] [Chan 33] - MF Rx << 9 [ON]
[22:21:23:919] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer timer 2
[22:21:23:919] [Thread: 3073817488] [Chan 33] - timer id 2 found, cancelling it now
[22:21:23:919] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 9
[22:21:23:919] [Thread: 3073817488] [Chan 33] - DNIS so far: 39, expected length: 7
[22:21:23:919] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with signal 0x31.
[22:21:23:919] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
[22:21:23:919] [Thread: 3073817488] [Chan 33] - scheduled timer id 3 (mf_back_cycle)
[22:21:23:999] [Thread: 3073817488] [Chan 33] - MF Rx << 9 [OFF]
[22:21:23:999] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
[22:21:24:079] [Thread: 3073817488] [Chan 33] - MF Rx << 0 [ON]
[22:21:24:079] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer timer 3
[22:21:24:079] [Thread: 3073817488] [Chan 33] - timer id 3 found, cancelling it now
[22:21:24:079] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 0
[22:21:24:079] [Thread: 3073817488] [Chan 33] - DNIS so far: 390, expected length: 7
[22:21:24:079] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with signal 0x31.
[22:21:24:079] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
[22:21:24:079] [Thread: 3073817488] [Chan 33] - scheduled timer id 4 (mf_back_cycle)
[22:21:24:159] [Thread: 3073817488] [Chan 33] - MF Rx << 0 [OFF]
[22:21:24:159] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
[22:21:24:239] [Thread: 3073817488] [Chan 33] - MF Rx << 1 [ON]
[22:21:24:239] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer timer 4
[22:21:24:239] [Thread: 3073817488] [Chan 33] - timer id 4 found, cancelling it now
[22:21:24:239] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 1
[22:21:24:239] [Thread: 3073817488] [Chan 33] - DNIS so far: 3901, expected length: 7
[22:21:24:239] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with signal 0x31.
[22:21:24:239] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
[22:21:24:239] [Thread: 3073817488] [Chan 33] - scheduled timer id 5 (mf_back_cycle)
[22:21:24:319] [Thread: 3073817488] [Chan 33] - MF Rx << 1 [OFF]
[22:21:24:319] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
[22:21:24:399] [Thread: 3073817488] [Chan 33] - MF Rx << 0 [ON]
[22:21:24:399] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer timer 5
[22:21:24:399] [Thread: 3073817488] [Chan 33] - timer id 5 found, cancelling it now
[22:21:24:399] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 0
[22:21:24:399] [Thread: 3073817488] [Chan 33] - DNIS so far: 39010, expected length: 7
[22:21:24:399] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with signal 0x31.
[22:21:24:399] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
[22:21:24:399] [Thread: 3073817488] [Chan 33] - scheduled timer id 6 (mf_back_cycle)
[22:21:24:479] [Thread: 3073817488] [Chan 33] - MF Rx << 0 [OFF]
[22:21:24:479] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
[22:21:24:559] [Thread: 3073817488] [Chan 33] - MF Rx << 9 [ON]
[22:21:24:559] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer timer 6
[22:21:24:559] [Thread: 3073817488] [Chan 33] - timer id 6 found, cancelling it now
[22:21:24:559] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 9
[22:21:24:559] [Thread: 3073817488] [Chan 33] - DNIS so far: 390109, expected length: 7
[22:21:24:559] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with signal 0x31.
[22:21:24:559] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
[22:21:24:559] [Thread: 3073817488] [Chan 33] - scheduled timer id 7 (mf_back_cycle)
[22:21:24:639] [Thread: 3073817488] [Chan 33] - MF Rx << 9 [OFF]
[22:21:24:639] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
[22:21:29:559] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer timer 7
[22:21:29:559] [Thread: 3073817488] [Chan 33] - timer id 7 found, cancelling it now
[22:21:29:559] [Thread: 3073817488] [Chan 33] - calling timer 7 (mf_back_cycle) callback
[22:21:29:559] [Thread: 3073817488] [Chan 33] - MF back cycle timed out!
[22:21:29:559] [Thread: 3073817488] [Chan 33] - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF state = DNIS Request Transmitted, MF Group = Backward Group A, CAS = 0x00
DNIS = 390109, ANI = , MF = 0x20
[22:21:29:559] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer timer 0
[22:21:29:559] [Thread: 3073817488] [Chan 33] - Cannot cancel timer 0

--
Atentamente,

Carlos Rodríguez Alcalá Villagra


-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-r2 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-r2

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-r2



--
Atentamente,

Carlos Rodríguez Alcalá Villagra


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-r2



--
Atentamente,

Carlos Rodríguez Alcalá Villagra

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120222/68652858/attachment-0001.htm>

More information about the asterisk-r2 mailing list