[asterisk-r2] MFC R2 Variant Venezuela using openR2
Madini Ladino
madinix at gmail.com
Wed Mar 31 09:12:23 CDT 2010
Thanks for your quick answer! I think the same thing, but E1 link is
currently connected to a Nortel and sync without problems. Just when I
connect to Asterisk I got blocked state and red alarm. I think there's a
cable construction issue? Maybe Nortel works with cross cable and Digium
card doesn't?
>Date: Tue, 30 Mar 2010 20:27:02 -0600
>From: Juan Carlos Huerta <juancarloshuerta at gmail.com>
>Subject: Re: [asterisk-r2] MFC R2 Variant Venezuela using openR2
>To: asterisk-r2 at lists.digium.com
>Message-ID:
<o2q60e5bf4c1003301927w2e60c4bfq6b4d2758be26772c at mail.gmail.com>
>Content-Type: text/plain; charset=ISO-8859-1
>It seems that the other end (CANTV) has blocked your E1 link, maybe
>you can ask to your carrier to check the link status in their end.
>Juan Carlos
>~ Lo que no te mata te fortalece ~
On Tue, Mar 30, 2010 at 6:37 PM, Madini Ladino <madinix at gmail.com> wrote:
> I have problems with E1s R2 MFC (CANTV) in Venezuela. Using zttool I got
Red
> Alarm.
>
> I'm using following versions:
>
> Asterisk 1.4.26.1
> *CLI> mfcr2 show version
> OpenR2 version: 1.2.0, revision: (release)
>
> My digium card is:
> pci:0000:0b:08.0???? wct4xxp+???? d161:0220 Wildcard TE220 (4th Gen)
>
> My? /etc/zaptel.conf? config is:
>
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15
> dchan=16
> bchan=17-31
> loadzone =es
> defaultzone=es
>
> span=2,1,0,cas,hdb3,crc4
> cas=32-46:1101
> dchan=47
> cas=48-62:1101
> loadzone =es
> defaultzone=es
>
> (span 1: I have a ISDN E1 (currently working), span 2: I have MFC R2? E1
> from CANTV)
>
>
> My /etc/zapata.conf
>
> group=4
> signalling=mfcr2
> mfcr2_variant=ve
> mfcr2_get_ani_first=no
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_category=national_
subscriber
> mfcr2_mfback_timeout=-1
> mfcr2_metering_pulse_timeout=-1
> mfcr2_logdir=log
> mfcr2_logging=all
> channel => 32-46
> channel => 48-62
>
>
> Actually this R2 E1 is connected to a Nortel and works. When I connect to
> digium card I only got Red alarm.? I'm using a balun to convert to RJ45.
>
> When I do zap restart I got:
>
> ? == Starting D-Channel on span 1
> ? == Starting R2 context on span 1
> ? == Starting R2 context on span 2
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 32
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 48
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 33
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 49
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 50
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 34
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 51
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 35
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 52
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 36
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 53
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
dahdi_r2_on_line_blocked:
> Far end blocked on chan 37
>
>
> When I run mfcr2 show channels I have:
>
> *CLI> mfcr2 show channels
> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS?? Rx CAS
> ? 32 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 33 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 34 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 35 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 36 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 37 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 38 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 39 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 40 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 41 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 42 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 43 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 44 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 45 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 46 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 48 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 49 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 50 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 51 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 52 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 53 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 54 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 55 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 56 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 57 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 58 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 59 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 60 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 61 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> ? 62 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
>
>
> This is my zttool for my span 2:
>
> ?????????????????? T2XXP (PCI) Card 0 Span 2 ??????????????????
> ?? ?????????????????????????????????????????????????????????????????? ?
> ??????
> ?? ????? ???????????????????????????????????????????????????????????? ?
> ?
> ?? ????? ???? Current Alarms:???? Red Alarm?????????????????????????? ?
> ?
> ?? ????? ???? Sync Source:??????? Internally clocked????????????????? ?? ?
> ?
> ?? ????? ???? IRQ Misses:?????????????? 0???????????????????????????? ??
??
> ?
> ?? ????? ???? Bipolar Viol:???????????? 0???????????????????????????? ?? ?
> ?
> ?? ????? ???? Tx/Rx Levels:???????? 0/? 0???????????????????????????? ?? ?
> ?
> ?? ????? ???? Total/Conf/Act:????? 31/ 31/ 30???????????????????????? ??
??
> ?
> ?? ????? ????????????????? 1111111111222222222233???????? ??????????? ?? ?
> ?
> ?? ????? ???????? 1234567890123456789012345678901???????? ? Back ???? ?? ?
> ?
> ?? ????? ???? TxA 111111111111111-111111111111111???????? ??????????? ?? ?
> ?
> ?? ????? ???? TxB 000000000000000-000000000000000???????????????????? ??
??
> ?
> ?? ????? ???? TxC 000000000000000-000000000000000???????????????????? ?? ?
> ?
> ?? ????? ???? TxD 111111111111111-111111111111111???????????????????? ?
> ?
> ?? ????? ???????????????????????????????????????????????? ??????????? ?
> ?
> ?? ????? ???? RxA 111111111111111-111111111111111???????? ? Loop ???? ?
> ?
> ?? ????? ???? RxB 111111111111111-111111111111111???????? ??????????? ?
> ?
> ?? ????? ???? RxC 000000000000000-000000000000000???????????????????? ?
> ?
> ?? ????? ???? RxD 111111111111111-111111111111111???????????????????? ?
> ?
> ?? ?????????????????????????????????????????????????????????????????? ?
> ?????
> ???????? ??????????????????????????????????????????????????????????????
>
>
>
> Anybody can help me?
>
> ????????????????????? Best regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100331/35a5de60/attachment-0001.htm
More information about the asterisk-r2
mailing list