[asterisk-r2] R2 Problem
Moises Silva
moises.silva at gmail.com
Tue Jun 29 16:24:43 CDT 2010
I saw this in the asterisk-r2 mailing list. Please keep the conversation
there.
Pastebin the output of mfcr2 show channels.
Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
On Tue, Jun 29, 2010 at 2:40 PM, Claudio Tajtelbaum <ctaity at gmail.com>wrote:
> You are mi last option, please help meeeee.
>
> Hi, i need to connect asterisk with a Harries 20-20 Semi Public PBX with
> mcf/r2 protocol.
> Mi hardware is Sangoma A101. Elastix 1.6 Realease. 1.2 libopenr2.
> The configuration of dahdi is
>
> /etc/dadhi/system.conf
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> #i test with and without this parmeter with same result.
> dchan=16
>
> /etc/asterisk/chan_dahdi.conf
>
> [channels]
> language=es
> signalling=mfcr2
> group=0
> mfcr2_variant=ar
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_logging=all
> channel=1-15
> channel=17-31
>
>
> My problem is, in all channels after init i got the message
>
> Far end blocked on chan XXXX
>
> The provider of the harries 20-20 tell me the variant use is AR.
> I use E1 crosscable to connect this pbx.
> No alarms, the status is Green ( ok).
>
> The configuration of the harries 20-20 is
>
>
>
> li 3-3
>
> SLOT 03-03/32 PORTS: 2MB
> TONE ADJUST
> CIRC NAME PLAN TR/RE COMMENT
> ---- ---- ---- ---- ------ -------
>
> 1/R2DGTL TG 35 CEL D/TT 0/0
> 2/R2DGTL TG 35 CEL D/TT 0/0
> 3/R2DGTL TG 35 CEL D/TT 0/0
> 4/R2DGTL TG 35 CEL D/TT 0/0
> 5/R2DGTL TG 35 CEL D/TT 0/0
> 6/R2DGTL TG 35 CEL D/TT 0/0
> 7/R2DGTL TG 35 CEL D/TT 0/0
> 8/R2DGTL TG 35 CEL D/TT 0/0
> 9/R2DGTL ---------- D/TT 0/0
> 10/R2DGTL ---------- D/TT 0/0
> 11/R2DGTL ---------- D/TT 0/0
> 12/R2DGTL ---------- D/TT 0/0
> 13/R2DGTL ---------- D/TT 0/0
> 14/R2DGTL ---------- D/TT 0/0
> 15/R2DGTL ---------- D/TT 0/0
> 16/IMD CTRL ---------- ----- 0/0
> 17/R2DGTL ---------- D/TT 0/0
> 18/R2DGTL ---------- D/TT 0/0
> 19/R2DGTL ---------- D/TT 0/0
> 20/R2DGTL ---------- D/TT 0/0
> 21/R2DGTL ---------- D/TT 0/0
> 22/R2DGTL ---------- D/TT 0/0
> 23/R2DGTL ---------- D/TT 0/0
> 24/R2DGTL ---------- D/TT 0/0
> 25/R2DGTL ---------- D/TT 0/0
> 26/R2DGTL ---------- D/TT 0/0
> 27/R2DGTL ---------- D/TT 0/0
> 28/R2DGTL ---------- D/TT 0/0
> 29/R2DGTL ---------- D/TT 0/0
> 30/R2DGTL ---------- D/TT 0/0
> 31/R2DGTL ---------- D/TT 0/0
> 32/2MB CTRL ---------- ----- 0/0
>
> Frame alignment signal error ................ 10 EXP-4
> Receive frame slip counter limit ............ 254
> Prompt maintenance prealarm counter limit ... 254
> Remote prealarm counter limit ............... 254
> Out of service prealarm counter limit ....... 254
> Prompt maintenance alarm on delay ........... 2.0 seconds
> Prompt maintenance alarm off delay .......... 2.0 seconds
> Remote alarm on delay ....................... 0.3 seconds
> Remote alarm off delay ...................... 0.3 seconds
> Signaling type .............................. STANDARD
> Channel 16 mode ............................. CAS
>
> BOA ...? tru li 35
>
> ************************ W A R N I N G
> *******************************
>
> Within this module, all ADDs, all DELetes, and some MODifys cannot be SAVed
> unless the switch is REBooted. You will be alerted when a MODify which
> requires a REBoot to SAVe is encountered and you will have the option to
> cancel it.
>
>
> ******************************************************************************
>
> Trunk group number ............ 35
> Trunk group type .............. R2DGTL
> Incoming class of service ..... 206 R2
> Trunk ID digits ............... NONE
> No answer extension ........... NONE
> Call flow ..................... BOTH
> Incoming dialing mode ......... MFC
> Incoming lookahead signaling .. NO
> Outgoing dialing mode ......... MFC
> Meter pulse ................... Yes
> Bit used for meter pulses ..... A-BIT
> Search type ................... CIRCULAR FORWARD
> Malicious call line signal .... No
> Forced release line signal .... Yes
> Double seizure allowed ........ Yes
> Circuit locations ............. 03-03-01 03-03-02 03-03-03 03-03-04
> Circuit locations ............. 03-03-05 03-03-06 03-03-07 03-03-08
> Unassigned circuit locations .. 22
> AW display name ............... CEL
> Teleset display name .......... CEL
> Comment ... GT-35 e1 salida celulares
>
> TRU ...? sys
>
> SYSEDT ...? r2
>
> SYSR2 ...? li
>
> Parameter [ALL] ...?
>
> Group A Function Signal
> ---------------- ------
> SND A1
> EOS A3
> SND-1 A2
> SND-2 A7
> SND-3 A8
> RESTART A10
> SND-CAT A5
> CONGESTION A4
> SPEECH A6
> SND-CATC N/A
> UNALLOC A4
> SND-NAT N/A
> RESTRICT N/A
> SND-N A9
>
> Group B Status Signal
> -------------- ------
> IDLE B6
> BUSY B3
> NOCHARGE B7
> MCT B1
> UNALLOC B5
> CONGESTION B4
> SND-TONE B2
> OUT-SERV B8
> NUM-CHG B2
> FAULTY B8
> UNAVAIL B5
>
> Group C Function Signal
> ---------------- ------
> SND-ANIC N/A
> RESTARTC N/A
> EOAC N/A
> CONGESTION N/A
> SNDC N/A
> SLDC N/A
>
> Group II Category Signal
> ----------------- ------
> SUB-PRIORITY II2
> SUB-NO-PRIORITY II1
> MAINT-EQUIP II3
> OPERATOR II1
> DATA-EQUIP II6
> SUB-NO-IDENTIFY II1
>
> ANI SOURCE: Auth code field
>
> R2 Protocol Parameters
> ------------------------------------------------------------------
> Send ANI after Sending Category of SUB-NO-IDENTIFY...............Y
> Send I-12 if ANI is requested, but no ANI is available...........Y
> Release trunk after receiving undefined Group A signals..........Y
> Send congestion tone after receiving undefined Group B signals...N
> Treat R2 B1 signal as Idle .....................................Y
> Send I-12 when restarting ANI digits.............................Y
>
>
>
> SYSR2 ...?
>
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100629/4af6c3db/attachment-0001.htm
More information about the asterisk-r2
mailing list