[asterisk-r2] R2 Problem

Wed Jun 30 13:58:13 CDT 2010

mfcr2 show channels: http://pastebin.com/8vgcSZ6m

On Tue, Jun 29, 2010 at 6:24 PM, Moises Silva <moises.silva at gmail.com>wrote:

> I saw this in the asterisk-r2 mailing list. Please keep the conversation
> there.
>
> Pastebin the output of mfcr2 show channels.
>
> Moises Silva
> Senior Software Engineer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
>
>
> On Tue, Jun 29, 2010 at 2:40 PM, Claudio Tajtelbaum <ctaity at gmail.com>wrote:
>
>> You are mi last option, please help meeeee.
>>
>> Hi, i need to connect asterisk with a Harries 20-20 Semi Public PBX with
>> mcf/r2 protocol.
>> Mi hardware is Sangoma A101. Elastix 1.6 Realease. 1.2 libopenr2.
>> The configuration of dahdi is
>>
>> /etc/dadhi/system.conf
>> span=1,1,0,cas,hdb3
>> cas=1-15:1101
>> cas=17-31:1101
>> #i test with and without this parmeter with same result.
>> dchan=16
>>
>> /etc/asterisk/chan_dahdi.conf
>>
>> [channels]
>> language=es
>> signalling=mfcr2
>> group=0
>> mfcr2_variant=ar
>> mfcr2_max_ani=10
>> mfcr2_max_dnis=4
>> mfcr2_logging=all
>> channel=1-15
>> channel=17-31
>>
>>
>> My problem is, in all channels after init i got the message
>>
>> Far end blocked on chan XXXX
>>
>> The provider of the harries 20-20 tell me the variant use is AR.
>> I use E1 crosscable to connect this pbx.
>> No alarms, the status is Green ( ok).
>>
>> The configuration of the harries 20-20 is
>>
>>
>>
>> li 3-3
>>
>> SLOT 03-03/32 PORTS: 2MB
>>                                      TONE  ADJUST
>> CIRC               NAME              PLAN  TR/RE   COMMENT
>> ----  ----         ----              ----  ------  -------
>>
>>  1/R2DGTL TG 35    CEL               D/TT   0/0
>>
>>  2/R2DGTL TG 35    CEL               D/TT   0/0
>>
>>  3/R2DGTL TG 35    CEL               D/TT   0/0
>>
>>  4/R2DGTL TG 35    CEL               D/TT   0/0
>>
>>  5/R2DGTL TG 35    CEL               D/TT   0/0
>>
>>  6/R2DGTL TG 35    CEL               D/TT   0/0
>>
>>  7/R2DGTL TG 35    CEL               D/TT   0/0
>>
>>  8/R2DGTL TG 35    CEL               D/TT   0/0
>>
>>  9/R2DGTL          ----------        D/TT   0/0
>>
>> 10/R2DGTL          ----------        D/TT   0/0
>>
>> 11/R2DGTL          ----------        D/TT   0/0
>>
>> 12/R2DGTL          ----------        D/TT   0/0
>>
>> 13/R2DGTL          ----------        D/TT   0/0
>>
>> 14/R2DGTL          ----------        D/TT   0/0
>>
>> 15/R2DGTL          ----------        D/TT   0/0
>>
>> 16/IMD CTRL        ----------        -----  0/0
>>
>> 17/R2DGTL          ----------        D/TT   0/0
>>
>> 18/R2DGTL          ----------        D/TT   0/0
>>
>> 19/R2DGTL          ----------        D/TT   0/0
>>
>> 20/R2DGTL          ----------        D/TT   0/0
>>
>> 21/R2DGTL          ----------        D/TT   0/0
>>
>> 22/R2DGTL          ----------        D/TT   0/0
>>
>> 23/R2DGTL          ----------        D/TT   0/0
>>
>> 24/R2DGTL          ----------        D/TT   0/0
>>
>> 25/R2DGTL          ----------        D/TT   0/0
>>
>> 26/R2DGTL          ----------        D/TT   0/0
>>
>> 27/R2DGTL          ----------        D/TT   0/0
>>
>> 28/R2DGTL          ----------        D/TT   0/0
>>
>> 29/R2DGTL          ----------        D/TT   0/0
>>
>> 30/R2DGTL          ----------        D/TT   0/0
>>
>> 31/R2DGTL          ----------        D/TT   0/0
>>
>> 32/2MB CTRL        ----------        -----  0/0
>>
>>
>> Frame alignment signal error ................ 10 EXP-4
>> Receive frame slip counter limit ............ 254
>> Prompt maintenance prealarm counter limit ... 254
>> Remote prealarm counter limit ............... 254
>> Out of service prealarm counter limit ....... 254
>> Prompt maintenance alarm on delay ........... 2.0 seconds
>> Prompt maintenance alarm off delay .......... 2.0 seconds
>> Remote alarm on delay ....................... 0.3 seconds
>> Remote alarm off delay ...................... 0.3 seconds
>> Signaling type .............................. STANDARD
>> Channel 16 mode ............................. CAS
>>
>> BOA ...? tru li 35
>>
>> ************************  W  A  R  N  I  N  G
>> *******************************
>>
>> Within this module, all ADDs, all DELetes, and some MODifys cannot be
>> SAVed
>> unless the switch is REBooted.  You will be alerted when a MODify which
>> requires a REBoot to SAVe is encountered and you will have the option to
>> cancel it.
>>
>>
>> ******************************************************************************
>>
>> Trunk group number ............ 35
>> Trunk group type .............. R2DGTL
>> Incoming class of service ..... 206     R2
>> Trunk ID digits ............... NONE
>> No answer extension ........... NONE
>> Call flow ..................... BOTH
>> Incoming dialing mode ......... MFC
>> Incoming lookahead signaling .. NO
>> Outgoing dialing mode ......... MFC
>> Meter pulse ................... Yes
>> Bit used for meter pulses ..... A-BIT
>> Search type ................... CIRCULAR FORWARD
>> Malicious call line signal .... No
>> Forced release line signal .... Yes
>> Double seizure allowed ........ Yes
>> Circuit locations ............. 03-03-01   03-03-02   03-03-03   03-03-04
>>
>> Circuit locations ............. 03-03-05   03-03-06   03-03-07   03-03-08
>>
>> Unassigned circuit locations .. 22
>> AW display name ............... CEL
>> Teleset display name .......... CEL
>> Comment ... GT-35 e1 salida celulares
>>
>> TRU ...? sys
>>
>> SYSEDT ...? r2
>>
>> SYSR2 ...? li
>>
>> Parameter [ALL] ...?
>>
>> Group A Function          Signal
>> ----------------          ------
>> SND                       A1
>> EOS                       A3
>> SND-1                     A2
>> SND-2                     A7
>> SND-3                     A8
>> RESTART                   A10
>> SND-CAT                   A5
>> CONGESTION                A4
>> SPEECH                    A6
>> SND-CATC                  N/A
>> UNALLOC                   A4
>> SND-NAT                   N/A
>> RESTRICT                  N/A
>> SND-N                     A9
>>
>> Group B Status            Signal
>> --------------            ------
>> IDLE                      B6
>> BUSY                      B3
>> NOCHARGE                  B7
>> MCT                       B1
>> UNALLOC                   B5
>> CONGESTION                B4
>> SND-TONE                  B2
>> OUT-SERV                  B8
>> NUM-CHG                   B2
>> FAULTY                    B8
>> UNAVAIL                   B5
>>
>> Group C Function          Signal
>> ----------------          ------
>> SND-ANIC                  N/A
>> RESTARTC                  N/A
>> EOAC                      N/A
>> CONGESTION                N/A
>> SNDC                      N/A
>> SLDC                      N/A
>>
>> Group II Category         Signal
>> -----------------         ------
>> SUB-PRIORITY              II2
>> SUB-NO-PRIORITY           II1
>> MAINT-EQUIP               II3
>> OPERATOR                  II1
>> DATA-EQUIP                II6
>> SUB-NO-IDENTIFY           II1
>>
>> ANI SOURCE: Auth code field
>>
>> R2 Protocol Parameters
>> ------------------------------------------------------------------
>> Send ANI after Sending Category of SUB-NO-IDENTIFY...............Y
>> Send I-12 if ANI is requested, but no ANI is available...........Y
>> Release trunk after receiving undefined Group A signals..........Y
>> Send congestion tone after receiving undefined Group B signals...N
>> Treat R2 B1 signal as Idle  .....................................Y
>> Send I-12 when restarting ANI digits.............................Y
>>
>>
>>
>> SYSR2 ...?
>>
>>
>>
>>
>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100630/9ba5ba1b/attachment.htm 