[asterisk-gui] Docs

[bkruse]

Ha,

I have been using that for quite sometime now, and its a pretty good
hack. :]

I plan to add something under custom trunks that says, if you
have zaptel and zapata already configured, then I will pull from that.

-bkruse

Brian Alexander wrote:
> I don't recommend using this in production... actually I don't 
> recommend using it at all... but I have been able to successfully use 
> a T1 PRI as a service provider in the GUI. This is 100% a hack and I 
> am not going to claim it will work for you but it has been working for 
> me.
>
>    1. Configure your zaptel.conf and zapata.conf manually
>    2. Using the Asterisk GUI configure a Custom-VOIP service provider.
>       It should use SIP protocol, not register and use a bogus hostname. 
>    3. The GUI will create a trunk_1 variable in the extensions.conf
>       and set it to SIP/trunk_1. Change the trunk_1 variable to point
>       to your digital span. For example "trunk_1=Zip/g0"
>    4. The GUI will also create a DID_trunk_1 context in
>       extensions.conf. You should use this as the context for your
>       digital span in zapata.conf
>
> LOL Like I said - its a hack. I just thought I would mention it in 
> case it can be helpful to someone else.
>
> -Brian
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui