[asterisk-gui] AsteriskGui and Sangoma A101 E1 Card

[A. Avona]

Thank yuo very much for the answer.
Regards
Accursio

Tzafrir Cohen ha scritto:
> On Fri, Apr 20, 2007 at 02:50:52PM +0200, A. Avona wrote:
>   
>> Hi all,
>> I have istalled asterisk 1.4.2 with a Sangoma A101 E1 card, everything
>> worked fine.
>> I then compiled AsteriskGui, and installed it without any problem, but
>> it doesn't recognize any zap channel.
>>     
>
> The GUI currently only automatically detects analog cards (Sangoma's
> cards as well, as well as our hardware, and also any other card for
> which you can provide a zaptel driver).
>
> You will need to configure the digital span manually, the same as with
> digital span of Digium T1/E1 cards.
>
>   
>> cat /proc/zaptel/* produce the following output:
>> -----------------------------------------------------
>> Span 1: WPE1/0 "wanpipe1 card 0" HDB3/CCS/CRC4 RED
>>
>>           1 WPE1/0/1 Clear (In use)
>>           2 WPE1/0/2 Clear (In use)
>>           3 WPE1/0/3 Clear (In use)
>>           4 WPE1/0/4 Clear (In use)
>>           5 WPE1/0/5 Clear (In use)
>>           6 WPE1/0/6 Clear (In use)
>>           7 WPE1/0/7 Clear (In use)
>>           8 WPE1/0/8 Clear (In use)
>>           9 WPE1/0/9 Clear (In use)
>>          10 WPE1/0/10 Clear (In use)
>>          11 WPE1/0/11 Clear (In use)
>>          12 WPE1/0/12 Clear (In use)
>>          13 WPE1/0/13 Clear (In use)
>>          14 WPE1/0/14 Clear (In use)
>>          15 WPE1/0/15 Clear (In use)
>>          16 WPE1/0/16 HDLCFCS (In use)
>>          17 WPE1/0/17 Clear (In use)
>>          18 WPE1/0/18 Clear (In use)
>>          19 WPE1/0/19 Clear (In use)
>>          20 WPE1/0/20 Clear (In use)
>>          21 WPE1/0/21 Clear (In use)
>>          22 WPE1/0/22 Clear (In use)
>>          23 WPE1/0/23 Clear (In use)
>>          24 WPE1/0/24 Clear (In use)
>>          25 WPE1/0/25 Clear (In use)
>>          26 WPE1/0/26 Clear (In use)
>>          27 WPE1/0/27 Clear (In use)
>>          28 WPE1/0/28 Clear (In use)
>>          29 WPE1/0/29 Clear (In use)
>>          30 WPE1/0/30 Clear (In use)
>>          31 WPE1/0/31 Clear (In use)
>>     
>
> This means Zaptel sees it, and Someone (Asterisk?) uses it.
>
>   
>> --------------------------------------------------
>>
>> grep zaptel /proc/modules produce the following output
>> --------------------------------------------------------
>> zaptel 187300 66 zttranscode,wanpipe, Live 0xe08e8000
>> crc_ccitt 6209 1 zaptel, Live 0xe08e5000
>> ------------------------------------------
>>
>> cat /etc/asterisk/zapscan.conf no output
>>     
>
> It will only have output if you have analog cards.
>
> BTW: what do you think we should put there for digital spans?
> (At least in the version I generate in genzaptelconf)
>
>