[asterisk-gui] AsteriskGui and Sangoma A101 E1 Card

[Tzafrir Cohen]

On Fri, Apr 20, 2007 at 02:50:52PM +0200, A. Avona wrote:
> Hi all,
> I have istalled asterisk 1.4.2 with a Sangoma A101 E1 card, everything
> worked fine.
> I then compiled AsteriskGui, and installed it without any problem, but
> it doesn't recognize any zap channel.

The GUI currently only automatically detects analog cards (Sangoma's
cards as well, as well as our hardware, and also any other card for
which you can provide a zaptel driver).

You will need to configure the digital span manually, the same as with
digital span of Digium T1/E1 cards.

> 
> cat /proc/zaptel/* produce the following output:
> -----------------------------------------------------
> Span 1: WPE1/0 "wanpipe1 card 0" HDB3/CCS/CRC4 RED
> 
>           1 WPE1/0/1 Clear (In use)
>           2 WPE1/0/2 Clear (In use)
>           3 WPE1/0/3 Clear (In use)
>           4 WPE1/0/4 Clear (In use)
>           5 WPE1/0/5 Clear (In use)
>           6 WPE1/0/6 Clear (In use)
>           7 WPE1/0/7 Clear (In use)
>           8 WPE1/0/8 Clear (In use)
>           9 WPE1/0/9 Clear (In use)
>          10 WPE1/0/10 Clear (In use)
>          11 WPE1/0/11 Clear (In use)
>          12 WPE1/0/12 Clear (In use)
>          13 WPE1/0/13 Clear (In use)
>          14 WPE1/0/14 Clear (In use)
>          15 WPE1/0/15 Clear (In use)
>          16 WPE1/0/16 HDLCFCS (In use)
>          17 WPE1/0/17 Clear (In use)
>          18 WPE1/0/18 Clear (In use)
>          19 WPE1/0/19 Clear (In use)
>          20 WPE1/0/20 Clear (In use)
>          21 WPE1/0/21 Clear (In use)
>          22 WPE1/0/22 Clear (In use)
>          23 WPE1/0/23 Clear (In use)
>          24 WPE1/0/24 Clear (In use)
>          25 WPE1/0/25 Clear (In use)
>          26 WPE1/0/26 Clear (In use)
>          27 WPE1/0/27 Clear (In use)
>          28 WPE1/0/28 Clear (In use)
>          29 WPE1/0/29 Clear (In use)
>          30 WPE1/0/30 Clear (In use)
>          31 WPE1/0/31 Clear (In use)

This means Zaptel sees it, and Someone (Asterisk?) uses it.

> --------------------------------------------------
> 
> grep zaptel /proc/modules produce the following output
> --------------------------------------------------------
> zaptel 187300 66 zttranscode,wanpipe, Live 0xe08e8000
> crc_ccitt 6209 1 zaptel, Live 0xe08e5000
> ------------------------------------------
> 
> cat /etc/asterisk/zapscan.conf no output

It will only have output if you have analog cards.

BTW: what do you think we should put there for digital spans?
(At least in the version I generate in genzaptelconf)

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir