[asterisk-gui] AsteriskGui and Sangoma A101 E1 Card

[A. Avona]

Hi all,
I have istalled asterisk 1.4.2 with a Sangoma A101 E1 card, everything
worked fine.
I then compiled AsteriskGui, and installed it without any problem, but
it doesn't recognize any zap channel.

cat /proc/zaptel/* produce the following output:
-----------------------------------------------------
Span 1: WPE1/0 "wanpipe1 card 0" HDB3/CCS/CRC4 RED

           1 WPE1/0/1 Clear (In use)
           2 WPE1/0/2 Clear (In use)
           3 WPE1/0/3 Clear (In use)
           4 WPE1/0/4 Clear (In use)
           5 WPE1/0/5 Clear (In use)
           6 WPE1/0/6 Clear (In use)
           7 WPE1/0/7 Clear (In use)
           8 WPE1/0/8 Clear (In use)
           9 WPE1/0/9 Clear (In use)
          10 WPE1/0/10 Clear (In use)
          11 WPE1/0/11 Clear (In use)
          12 WPE1/0/12 Clear (In use)
          13 WPE1/0/13 Clear (In use)
          14 WPE1/0/14 Clear (In use)
          15 WPE1/0/15 Clear (In use)
          16 WPE1/0/16 HDLCFCS (In use)
          17 WPE1/0/17 Clear (In use)
          18 WPE1/0/18 Clear (In use)
          19 WPE1/0/19 Clear (In use)
          20 WPE1/0/20 Clear (In use)
          21 WPE1/0/21 Clear (In use)
          22 WPE1/0/22 Clear (In use)
          23 WPE1/0/23 Clear (In use)
          24 WPE1/0/24 Clear (In use)
          25 WPE1/0/25 Clear (In use)
          26 WPE1/0/26 Clear (In use)
          27 WPE1/0/27 Clear (In use)
          28 WPE1/0/28 Clear (In use)
          29 WPE1/0/29 Clear (In use)
          30 WPE1/0/30 Clear (In use)
          31 WPE1/0/31 Clear (In use)
--------------------------------------------------

grep zaptel /proc/modules produce the following output
--------------------------------------------------------
zaptel 187300 66 zttranscode,wanpipe, Live 0xe08e8000
crc_ccitt 6209 1 zaptel, Live 0xe08e5000
------------------------------------------

cat /etc/asterisk/zapscan.conf no output

Is there someone who can help me?

Thanks in advance
Best regards
Accursio Avona