[asterisk-embedded] Address to Flash uClinux to on AADK

[Brian Alexander]

Thanks for responding guys. In printenv I see

flashboot=bootm 0x20100000

If I understand correctly I would use

cp.b 1000000 20100000 $(filesize)

Does that look correct? Do I need the 0x in cp.d to indicate the value s in
hex?

Thanks again,
-Brian


On 11/1/07, Wojciech Tryc <wojtek at voipman.org> wrote:
>
>  Brian,
> The $(filesize) is a valid variable within u-boot, so you just leave it as
> $(filesize).
> The address seems correct, but to make sure please run printenv from the
> u-boot prompt to see where your image reside.
>
> Regards,
> Wojtek
>
> -----
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-embedded/attachments/20071101/3ce2a859/attachment.htm