[asterisk-dev] DAHDI FXO Reorder Tone

[Tzafrir Cohen]

On Fri, Jun 18, 2010 at 06:02:36PM -0300, Fernando Berretta wrote:
> Hi,
> 
> I'm having problems with a Digium board to detect Reorder Tones over 
> Argentinean analog line. I've
> 
> |busydetect=yes
> busycount=2

busycount=2 ? That we cause many false detections.

> loadzone=ar
> defaultzone=ar

Is this /etc/asterisk/chan_dahdi.conf or /etc/dahdi/system.conf ?

> 
> But.. I still have problems so.. I would like to know where can I change busypatterns I think someplace in Dahdi code should be the possibility to set reorder tones patterns like:
> Low Freq [Hz]=410
> High Freq [Hz]=430
> Low Freq Level [-dBm]= 10
> High Freq Level [-dBm]=24
> First Signal On Time=30
> First Signal Off Time=20
> Second Signal On Time=30
> Second Signal Off Time]=20
> 
> Could some one point me how source file should I modify in DAHDI source code ?

Busy-detection is in Asterisk. Not DAHDI. However, I suspect there are
simpler things to do.

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir