[Asterisk-Dev] Caller Name: Asterisk reading too fast

[Brian West]

If you add a wait,2 before you answer you should get it then.

/b


On 9/16/05 10:50 PM, "J Thomas" <jthomas at cequip.com> wrote:

> I am cross posting this on dev, because there could be some protocol
> related issues here.
> 
> (On the other hand this telco guy's response may be one of those hall of
> famers :-)
> 
> I asked my telco to release caller name on the PRI. Earlier they were
> releasing only the phone number.
> 
> I still did not see the name, but only the number in caller id. Actually
> I now see number twice. When I inquired with them this is the response I
> got:
> 
>       "I ran a trace on your TG.  I see that your switch is
>         picking up the call so fast that it is not able to pick
>         up the name. The name is being sent, but I suspect after
>         it is too late.  This is something that will need to be
>         corrected in your switch.
> 
>         I have attached a sample call out of the trace I performed
>         this morning."
> 
> They have sent me the trace file. It an be found at
> http://pastebin.ca/23171
> 
> Is there a way, as it is, in Asterisk so that it reads the caller name
> properly?
> 
> Thanks,
> -- jt
> 
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev