[Asterisk-Dev] Transfer hold party to active party

[Flobi]

Just to make sure, are you referring to a scenario like this?
 call 1:
channel 1 is sitting at a music on hold extension (or other holding ext but
not a bridged call, i.e connected to channel 4)
 call 2:
channel 2 is bridged to channel 3
 where channel 3 is trying to connect party 1 with party 2 with a transfer.
If so, this is the same scenario I am trying to figure out.
 If party 1 is connected to another party, you can do this by using the
masqerade function. Masquerade as party 4 to do this. Party 4 will be hung
up as if party 1 had simply hung up their phone.

 On 10/19/05, Daniel Montejo Biosca (hotmail) <montejodaniel at hotmail.com>
wrote:
>
> Hello,
> i need transfer a call in the next scenario:
> I have two calls in a Sip channel: call1: party1 - Sip and call2: Sip -
> party2. The call1 is in held state and call2 is active. I need transfer
> the
> hold call two active call. This is the result: call3: party1 - party2.
>
> How can do this with manager api or using a Asterisk function?
>
> Thank you
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-dev
>



--
Automated Signature: This message is from Flobi of Flobi.com<http://Flobi.com>
.
Visit my website if you like: http://www.flobi.com/

Please remember to tip your waitress and bartender. They are doing their
best to serve you and your indignant, malcontent attitude.
--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20051019/0fc65893/attachment.htm