[Asterisk-Dev] DTMF and Broadvoice

[Christopher Jacob]

I notice in tour extensions.conf example you use SetCallerID and SetCIDName
before sending the call up to broadvoice. Are you able to successfully
override the CID that broadvoice sends by default?

Anyone else know if this is possible?

For example BV sends my CID as "Christopher Jacob" and I want to change it
to "Acme Widgets"... is this possible?

~chris

-----Original Message-----
From: asterisk-dev-admin at lists.digium.com
[mailto:asterisk-dev-admin at lists.digium.com] On Behalf Of Rich Adamson
Sent: Tuesday, August 10, 2004 12:55 PM
To: asterisk-dev at lists.digium.com
Subject: Re: [Asterisk-Dev] DTMF and Broadvoice

> I have found threads here and there talking about this, but has anyone
> figured out how to get DTMF in asterisk when using broadvoice as an
inbound
> provider?

No problem here; just tested it.

The key seems to be defining a sip context with dtmfmode=inband and
allow=ulaw. However as others have posted recently, there seems to be
a change in how * sip contexts function relative to type=peer, etc. Might
review those posts.

The sip entries that I use (and are currently functional) are:
register=3035399034:mysecret at sip.broadvoice.com  

[broadvoice]
type=peer                                                     
host=sip.broadvoice.com
canreinvite=no
dtmfmode=inband
fromuser=3035399034
fromdomain=sip.broadvoice.com
context=from-broadvoice
disallow=all
allow=ulaw
deny=0.0.0.0/0.0.0.0
permit=147.135.8.129/255.255.255.0
permit=147.135.0.129/255.255.255.0

and for outgoing calls in extensions.conf, I'm using:
exten => _1.,1,SetCallerID,3035399034
exten => _1.,2,SetCIDName,"Rich Adamson"
exten => _1.,3,Dial,Sip/broadvoice/${EXTEN}
exten => _1.,4,Congestion

In addition, I've got an entry in /etc/hosts for sip.broadvoice.com
that without it, won't allow * to place bv calls. Contrary to previous
postings, I'm not using the srvlookup=yes as someone suggested.

We've all been told that type=user is for 'inbound' call type, however
the type=peer (above) is the only one that works for me. If I remove
any of the parameters in the above context, inbound calls fail
suggesting the context _is_ used for inbound calls.

Rich


_______________________________________________
Asterisk-Dev mailing list
Asterisk-Dev at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-dev
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-dev