[Asterisk-Dev] Asterisk behind Siemens PBX via BRI interface

[GIBERT Frédéric]

Do you manage to do it with PRI interface?
 
 
-----Message d'origine-----
De : asterisk-dev-admin at lists.digium.com
[mailto:asterisk-dev-admin at lists.digium.com] De la part de Jason Penton
Envoyé : jeudi 29 avril 2004 11:43
À : asterisk-dev at lists.digium.com
Objet : RE: [Asterisk-Dev] Asterisk behind Siemens PBX via BRI interface
 
I was wondering the same thing. I would assume that we would somehow
have to coinfigure the BRI on the legacy PBX as a trunk.
 
Not sure about this and haven't had a chance to try yet
 
 
 

  _____  

From: asterisk-dev-admin at lists.digium.com
[mailto:asterisk-dev-admin at lists.digium.com] On Behalf Of GIBERT
Frédéric
Sent: 29 April 2004 11:35 AM
To: asterisk-dev at lists.digium.com
Cc: 'GIBERT Frédéric'
Subject: [Asterisk-Dev] Asterisk behind Siemens PBX via BRI interface
Hello,
I actually try to connect asterisk behind a siemens PBX to make some
test.
I use a fritz passive ISDN card with 1 BRI port.
Actually, to make it work, I have changed the mode of my BRI PBX
connection to a S0 BUS. As this, I can fake the telco, and so I’m able
to connect the fritz card to the siemens.
My problem is I can’t manage prefix on the siemens in order to place
call from the PBX to asterisk. The only way to make such call is to dial
the number of the S0 Bus.
Does someone get an idea to let my PBX in normal ISDN mode, and to
connect with the fritz card? In this way, I will be able to manage
prefix on both asterisk and siemens part.
Thanks.
GIBERT Frédéric
Ste VigiNetworks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20040429/0d9ee10a/attachment.htm