[Asterisk-Dev] Asterisk behind Siemens PBX via BRI interface

[Jason Penton]

I was wondering the same thing. I would assume that we would somehow have to
coinfigure the BRI on the legacy PBX as a trunk.
 
Not sure about this and haven't had a chance to try yet
 
 


  _____  

From: asterisk-dev-admin at lists.digium.com
[mailto:asterisk-dev-admin at lists.digium.com] On Behalf Of GIBERT Frédéric
Sent: 29 April 2004 11:35 AM
To: asterisk-dev at lists.digium.com
Cc: 'GIBERT Frédéric'
Subject: [Asterisk-Dev] Asterisk behind Siemens PBX via BRI interface



Hello,

I actually try to connect asterisk behind a siemens PBX to make some test.

I use a fritz passive ISDN card with 1 BRI port.

Actually, to make it work, I have changed the mode of my BRI PBX connection
to a S0 BUS. As this, I can fake the telco, and so I’m able to connect the
fritz card to the siemens.

My problem is I can’t manage prefix on the siemens in order to place call
from the PBX to asterisk. The only way to make such call is to dial the
number of the S0 Bus.

Does someone get an idea to let my PBX in normal ISDN mode, and to connect
with the fritz card? In this way, I will be able to manage prefix on both
asterisk and siemens part.



Thanks.

GIBERT Frédéric

Ste VigiNetworks







-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-dev/attachments/20040429/b79e7b6e/attachment.htm