[Asterisk-Dev] Hardware support for TDM

[John James]

Claude,

I used an MSI KT4 to test the TDM card.  The only issue that I noticed was that the TDM card does not like to share interrupts.  Just ensure that the IRQ for the slot where you insert the card is not shared.

John


-----Original Message-----
From: asterisk-dev at lists.digium.com
Sent: 7/28/2003 8:43 AM
To: asterisk-dev at lists.digium.com; asterisk-users at lists.digium.com
Subject: [Asterisk-Dev] Hardware support for TDM


Hi All,
 
Last week I had problems installing the TDM DK on my Dell Dimension 2100. Digium support confirmed that there is an incompatibility problem between the TDM card (TDM400P) and the motherboard, and that problem will be fixed sometime in September (which is too late for me). Also, Digium tech support were unable to provide me with a list of supported motherboards.
 
Can someone tell me what platform they're using (brand/model/clone)? I am not looking for a high end server for now. The purpose is to evaluate Asterisk with the Digium cards and develop a simple 'proof of concept' dialer.
 
Also, would using a Dialogic card a good alternative? Has anyone used an analog Dialogic card with Asterisk? which model?
 
Thanks for any help/suggestions/recommendations
 
Regards,
 
Claude