[Asterisk-Dev] Hardware support for TDM

[Peter Grace]

Yep,

I can most certainly concur on this one.  Having shared IRQ's will put a
monkey wrench in your attempts to initialize any of the zapata hardware.
It took me about an hour to get the bios settings just right to make the
two zapata pci slots have dedicated IRQ's.  *phew*

Pete (km-)


On Mon, 28 Jul 2003, John James wrote:

> Claude,
>
> I used an MSI KT4 to test the TDM card.  The only issue that I noticed was that the TDM card does not like to share interrupts.  Just ensure that the IRQ for the slot where you insert the card is not shared.
>
> John
>
>
> -----Original Message-----
> From: asterisk-dev at lists.digium.com
> Sent: 7/28/2003 8:43 AM
> To: asterisk-dev at lists.digium.com; asterisk-users at lists.digium.com
> Subject: [Asterisk-Dev] Hardware support for TDM
>
>
> Hi All,
>
> Last week I had problems installing the TDM DK on my Dell Dimension 2100. Digium support confirmed that there is an incompatibility problem between the TDM card (TDM400P) and the motherboard, and that problem will be fixed sometime in September (which is too late for me). Also, Digium tech support were unable to provide me with a list of supported motherboards.
>
> Can someone tell me what platform they're using (brand/model/clone)? I am not looking for a high end server for now. The purpose is to evaluate Asterisk with the Digium cards and develop a simple 'proof of concept' dialer.
>
> Also, would using a Dialogic card a good alternative? Has anyone used an analog Dialogic card with Asterisk? which model?
>
> Thanks for any help/suggestions/recommendations
>
> Regards,
>
> Claude
>
> _______________________________________________
> Asterisk-Dev mailing list
> Asterisk-Dev at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-dev
>