[Asterisk-bsd] dahdi

[Sam Fourman Jr.]

On Wed, Mar 24, 2010 at 1:01 AM, Max Khon <fjoe at samodelkin.net> wrote:
> Hello, Sam!
>
> On Tue, Mar 23, 2010 at 8:00 PM, Sam Fourman Jr. <sfourman at gmail.com> wrote:
>
>> I have a Fresh install of FreeBSD8, I installed Asterisk 1.6.21 from
>> ports.
>> I checked the box dahdi when installing Asterisk 1.6.21.
>>
>> After seeing the patches for FreeBSD dahdi posted on this list, I
>> purchased this card,
>> http://www.nicherons.com/TDM410P.html
>>
>> What commands would I use to verify that dahdi is working,and that is
>> supports my TDM410P
>
> It should be enough to put
>
> dahdi_enable="YES"
> dahdi_modules="wctdm24xxp"
>
> in /etc/rc.conf
>
> and run
>
> /usr/local/etc/rc.d/dahdi start

Thanks Max,

I believe it worked.

Telephony Interface Registered on major 196
Version:
wctdm24xxp0: vendor=d161 device=8005 subvendor=ffffffff
wctdm24xxp0: <Wildcard TDM410P> port 0xd000-0xd0ff mem
0xe1008000-0xe10083ff irq 17 at device 9.0 on pci0
wctdm24xxp0: [FILTER+ITHREAD]
wctdm24xxp0: Port 1: Installed -- AUTO FXO (FCC mode)
wctdm24xxp0: Port 2: Installed -- AUTO FXO (FCC mode)
wctdm24xxp0: Port 3: Installed -- AUTO FXO (FCC mode)
wctdm24xxp0: Port 4: Installed -- AUTO FXS/DPO
wctdm24xxp0: VPM100: Not Present

idk what VPM100 means, but none the less I think this is going to work
wctdm24xxp0: Found a Wildcard TDM: Wildcard TDM410P (0 digital
modules, 4 analog modules)

Sam Fourman Jr.
Fourman Networks