[Asterisk-bsd] zaptel ' device not configured'

[Christian Lox]

Hi all.

Trying to install asterisk on FreeBSD 6.1-RELEASE.
asterisk is 1.4.3 and zaptel is 1.4.1, which seem to be the latest  
releases.

We want to use a Sitecom HFC based card.
After installing Hans Selaksys i4b the card ist recognized:
ihfc0: <HFC-2BDS0 128K PCI ISDN adapter> port 0xbc00-0xbc07 mem  
0xff900000-0xff9000ff irq 19 at device 3.0 on pci2
ihfc0: Attaching I4B controller 0.
ihfc0: Creating /dev/ihfc0.X.

Zaptel seems to run:
Zapata Telephony Interface Registered on major 196
Echo Canceller: MG2

But when running ztcfg -vvv we get:
Keyword: [loadzone], Value: [nl]
Keyword: [defaultzone], Value: [nl]
Keyword: [span], Value: [1,1,3,ccs,ami]
Keyword: [bchan], Value: [1-2]
Keyword: [dchan], Value: [3]

Zaptel Version: 1.4.0-BSD
Echo Canceller: MG2
Configuration
======================

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)

3 channels configured.

ZT_SPANCONFIG failed on span 1: Device not configured (6)



We did not find really helpful on google concerning htis "device not  
configured".

Are we missing something really obvious here?
Thanks for any hint!

Christian

P.S. vmstat -i
interrupt                          total       rate
irq1: atkbd0                          26          0
irq15: ata1                           47          0
irq18: em0 uhci2+                  10672         12
irq19: ihfc0 uhci1                     2          0
cpu0: timer                      1768972       1996
Total                            1779719       2008

We changed the pci slot, because ihfc was shared with the ethernet  
NIC....But no change.....