[Asterisk-bsd] zaptel ' device not configured'

[Hans Petter Selasky]

On Monday 28 May 2007 17:50, Christian Lox wrote:
> Hi all.
>
> Trying to install asterisk on FreeBSD 6.1-RELEASE.
> asterisk is 1.4.3 and zaptel is 1.4.1, which seem to be the latest
> releases.
>
> We want to use a Sitecom HFC based card.
> After installing Hans Selaksys i4b the card ist recognized:
> ihfc0: <HFC-2BDS0 128K PCI ISDN adapter> port 0xbc00-0xbc07 mem
> 0xff900000-0xff9000ff irq 19 at device 3.0 on pci2
> ihfc0: Attaching I4B controller 0.
> ihfc0: Creating /dev/ihfc0.X.
>
> Zaptel seems to run:
> Zapata Telephony Interface Registered on major 196
> Echo Canceller: MG2
>
> But when running ztcfg -vvv we get:
> Keyword: [loadzone], Value: [nl]
> Keyword: [defaultzone], Value: [nl]
> Keyword: [span], Value: [1,1,3,ccs,ami]
> Keyword: [bchan], Value: [1-2]
> Keyword: [dchan], Value: [3]
>
> Zaptel Version: 1.4.0-BSD
> Echo Canceller: MG2
> Configuration
> ======================
>
> SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
>
> Channel map:
>
> Channel 01: Clear channel (Default) (Slaves: 01)
> Channel 02: Clear channel (Default) (Slaves: 02)
> Channel 03: D-channel (Default) (Slaves: 03)
>
> 3 channels configured.
>
> ZT_SPANCONFIG failed on span 1: Device not configured (6)
>
>
>
> We did not find really helpful on google concerning htis "device not
> configured".
>
> Are we missing something really obvious here?
> Thanks for any hint!
>

Hello!

Did you install and configure "chan_capi" which is also part of the SVN trunk?

--HPS