[Asterisk-bsd] Re: H323 channel driver is not capable to make outgoing calls

[Andrew A. Kochetkoff]

Dmitriy Belonozhkin wrote:
> Hello All,
> 
> Monday, April 18, 2005, 7:00:38 PM, you wrote:
> 
> DB> There is a problem with the port of asterisk for FreeBSD. It is
> DB> not capable to make outgoing calls using H323 channel driver.
> 
> The described problem has been solved. I updated source tree of
> Asterisk using CVSup as Andrew A. Kochetkoff recommends and took ports
> of OpenH323 and PWLib created by Kirk Davis. Asterisk was built with
> H.323 channel driver without any serious problems ant it is capable to
> make outgoing calls using H.323 now. Of course it requires much more
> time to configure and to test Asterisk in order to be fully sure that
> it really works properly. But anyway thanks everybody for help and
> advices.
> 
> By the way did anybody try to connect Cisco IP Phone 7940 (SIP) to
> Avaya IP Office (H.323) using Asterisk as protocol converter or
> something like this? May be somebody can share its experience with me.
> 
> *[skipped]*
> 
> --- 
> Best regards,
>  Dmitriy Belonozhkin
>  TeleDATA Engineering LLC (Orel, Russia)
>  Phone: +7-086-2-499931 (ext. 206)
>  mailto:dan at tdata.ru
>  http://www.tdata.ru/
> 
> 
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
> 
> 
I'm use Asterisk with CISCO-7902G and AVAYA Definity like PSTN-Gateway.
Your question.

-- 
С уважением:
Андрей Кочетков
ООО "Современные Системы Связи", "Мобил-Телеком"
Чита, ул. Заб. Рабочего, 94
тел.: 8 (3022) 23-33-33
mailto:andrews at mtelecom.chita.ru