[Asterisk-bsd] WCT1xxP driver

[Alexander Timoshenko]

Jason T. Nelson (jtn at jtn.cx) wrote:
> Being the adventurous sort I am, I downloaded the nightly snapshot for
> the wct1xxp driver from the location specified on the BSD page on the wiki,
> to see how far things have come along. It compiled fine, latest release libpri 
> and Asterisk compiled okay too.  The driver loads without too many complaints, 
> except one really. This keeps showing up, over and over, in /var/log/messages:
> 
> ints == 5
> ints == a
    My fault. Forgot to remove debug output. Get the current version.
> 
> The repeat multiple times a second sometimes, but it doesn't seem to affect
> the line from coming up with no alarms after about 10 seconds (zttool shows
> no alarm). Now, asterisk starts, sees the new channels with "zap show 
> channels", but "pri show span 1" shows this:
    You should build asterisk against libpri from CVS. Older version had
wrong byte order detection, they will not work. I've made libpri 1.0.1 port
with given patch, but it is not commited yet. 

> mart-pbx*CLI> pri show span 1
> Primary D-channel: 24
> Status: Provisioned, Down, Active
> 
> The "Down" part is curious. Any attempted call outbound of course fails,
> Asterisk complaining that all lines are busy.

-- 
gonzo