[asterisk-biz] Benchmark on Digium Wildcard TE410P

Olivier Vermeulen oliver at wvg-tele.com
Fri Jul 11 13:56:16 CDT 2008


Hi Steve, Others,

 

I ran on a Wildcard TE410P (3rd Gen)

Intel(R) Pentium(R) D CPU 3.20GHz

1GB RAM

 

I ran full 100 channels without problems. with CPU at ~65% average

Using SIP/G729

 

If I push more the CPU goes to 90-100% 

 

It's interconnected TDM 4 x E1, I'm running nothing else on the asterisk but
pass true SIP/TDM

 

My target is to put 2 cards inside a dual quad core 3Ghz with 4GB ram, see
if I can get full 240 channels out of it.

 

Cheers,

Oliver

 

 

 

 

 

From: Steve Totaro [mailto:stotaro at totarotechnologies.com] 
Sent: Friday, July 11, 2008 5:01 PM
To: oliver at wvg-tele.com; Commercial and Business-Oriented Asterisk
Discussion
Subject: Re: [asterisk-biz] Benchmark on Digium Wildcard TE410P

 

 

On Thu, Jul 10, 2008 at 12:00 PM, Olivier Vermeulen <oliver at wvg-tele.com>
wrote:

Dear Sirs,

 

What is recommended CPU for  2 x digium T410P cards 4xE1

I'm trying to setup and TDM interconnect.

 

I would need to load full capacity on both cards. What kind CPU would I need
for that ?

 

Anybody ran benchmarks ?

 

Thanks,


Oliver,

I cannot give you a good benchmark (but this is a project that I am working
on).

The closest I can give you is a four port Sangoma card with 95 active
channels (NFAS PRI) with no echo can.  Simply acting as a TDM/SIP (ULAW)
gateway, NOTHING else.

A single core 3ghz xeon with a couple gigs of RAM ran at ~75% CPU load
(solid for months).

I know it is not much to go off of and there is a project in the works to
get much better benchmarks on a very wide spectrum of hardware and usage.

Thanks,
Steve Totaro
 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-biz/attachments/20080711/a02b9d0a/attachment.htm 


More information about the asterisk-biz mailing list