[asterisk-users] Panasonic PBX connect to Asterisk

Fri Sep 16 04:45:09 CDT 2016

Dear all,

thanks for the help.
I'm going to try using E1 gateway to convert sip to e1.

-ikka-

On Fri, Sep 16, 2016 at 3:28 AM, C F <shmaltz at gmail.com> wrote:

> Use a sip to PRI gateway or a PRI card in the asterisk system. Connect
> that to the Panasonic TDA600 using a PRI card on the panasonic side
> (KX-TDA0290).
> this will be the most worry free solution.
>
> On Wed, Sep 14, 2016 at 2:05 AM, Harry McGregor <hmcgregor at biggeeks.org>
> wrote:
>
>> Hi,
>>
>>
>> You need to find out more about the configuration of this specific
>> TDA600, as it could be either POTS or E1, once you know that, you can
>> determine what options are best.
>>
>> -Harry
>>
>> On 09/13/2016 10:51 PM, Ikka Tirtawidjaja wrote:
>>
>> Dear Harry,
>>
>> Thx for the explanation.
>>
>> My team manage building's PBX that use Asterisk 13.x.
>> We use Asterisk PBX for this buildings that have apartment and office
>> customer.
>> From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter
>> (cisco SPA112).
>> Others are using PBX like panasonic analog, audiocodes SBC, etc, and we
>> use ATA Converter to convert from SIP to Analog (CO Line)
>>
>> Now, we have a new customer (tenant) that have Panasonic TDA600.
>> If we use FXS or ATA Converter, its going to have a lot of that, because
>> this tenant going to use about 60 ext / sip line.
>> Replacing asterisk PBX on my (company) side or replace TDA600 on my
>> customer side is not acceptable.
>> So we need to find a "win-win" solution for this.
>>
>> Thx in advance,
>>
>>
>> Ikka
>>
>>
>>
>>
>> On Wed, Sep 14, 2016 at 12:40 PM, Harry McGregor <hmcgregor at biggeeks.org>
>> wrote:
>>
>>> Hi,
>>>
>>> On 09/13/2016 06:51 AM, Ikka Tirtawidjaja wrote:
>>>
>>> Hi,
>>>
>>> Is there anyone here who has experience connecting Asterisk (ver 13.8)
>>> with PBX Panasonic KX-TDA600 ?
>>>
>>> The architecture more less like this :
>>>
>>>
>>> Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone /
>>> Fax
>>>
>>>
>>> What connectivity do you currently use for the KX-TDA600?  E1, T1, POTS,
>>> BRI?
>>>
>>> Others have suggested a SIP to E1/T1 gateway, which would let you skip
>>> the asterisk box, if you don't have other uses for it.
>>>
>>> Another option is to use a PCI-E E1/T1 interface card in the asterisk
>>> box, especially if you already have an E1 or T1 interface in the KX-TDA600.
>>> I personally don't like buying smaller then a dual T1/E1 card, as the price
>>> difference between a dual and a single is so small.  If the KX-TDA600 is
>>> set-up for Analog/POTS, you can use a channel bank on the second T1/E1
>>> port, and feed POTS into the KX-TDA600.
>>>
>>> For a small installation that wanted to keep their Nortel Key System,
>>> and their Telco really wanted to provide a PRI instead of POTS (the Nortel
>>> could only take pots), we used a dual T1 PCI card in an asterisk box, ran
>>> PRI on the Telco interface, an ADIT 600 channel bank on the second
>>> interface, and handed 4 POTS lines to the Nortel Key System.
>>>
>>> The key is to give your self the most flexibility to change later, and
>>> preserve your existing investment.
>>>
>>> -Harry
>>>
>>> Thanks in advance,
>>>
>>>
>>> Regards,
>>>
>>> Ikka - Jakarta, Indonesia
>>>
>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>>       http://www.asterisk.org/community/astricon-user-conference
>>>
>>> New to Asterisk? Start here:
>>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160916/c6a783fb/attachment.html>