[asterisk-users] Panasonic PBX connect to Asterisk

[C F]

Use a sip to PRI gateway or a PRI card in the asterisk system. Connect that
to the Panasonic TDA600 using a PRI card on the panasonic side (KX-TDA0290).
this will be the most worry free solution.

On Wed, Sep 14, 2016 at 2:05 AM, Harry McGregor <hmcgregor at biggeeks.org>
wrote:

> Hi,
>
>
> You need to find out more about the configuration of this specific TDA600,
> as it could be either POTS or E1, once you know that, you can determine
> what options are best.
>
> -Harry
>
> On 09/13/2016 10:51 PM, Ikka Tirtawidjaja wrote:
>
> Dear Harry,
>
> Thx for the explanation.
>
> My team manage building's PBX that use Asterisk 13.x.
> We use Asterisk PBX for this buildings that have apartment and office
> customer.
> From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter
> (cisco SPA112).
> Others are using PBX like panasonic analog, audiocodes SBC, etc, and we
> use ATA Converter to convert from SIP to Analog (CO Line)
>
> Now, we have a new customer (tenant) that have Panasonic TDA600.
> If we use FXS or ATA Converter, its going to have a lot of that, because
> this tenant going to use about 60 ext / sip line.
> Replacing asterisk PBX on my (company) side or replace TDA600 on my
> customer side is not acceptable.
> So we need to find a "win-win" solution for this.
>
> Thx in advance,
>
>
> Ikka
>
>
>
>
> On Wed, Sep 14, 2016 at 12:40 PM, Harry McGregor <hmcgregor at biggeeks.org>
> wrote:
>
>> Hi,
>>
>> On 09/13/2016 06:51 AM, Ikka Tirtawidjaja wrote:
>>
>> Hi,
>>
>> Is there anyone here who has experience connecting Asterisk (ver 13.8)
>> with PBX Panasonic KX-TDA600 ?
>>
>> The architecture more less like this :
>>
>>
>> Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax
>>
>>
>> What connectivity do you currently use for the KX-TDA600?  E1, T1, POTS,
>> BRI?
>>
>> Others have suggested a SIP to E1/T1 gateway, which would let you skip
>> the asterisk box, if you don't have other uses for it.
>>
>> Another option is to use a PCI-E E1/T1 interface card in the asterisk
>> box, especially if you already have an E1 or T1 interface in the KX-TDA600.
>> I personally don't like buying smaller then a dual T1/E1 card, as the price
>> difference between a dual and a single is so small.  If the KX-TDA600 is
>> set-up for Analog/POTS, you can use a channel bank on the second T1/E1
>> port, and feed POTS into the KX-TDA600.
>>
>> For a small installation that wanted to keep their Nortel Key System, and
>> their Telco really wanted to provide a PRI instead of POTS (the Nortel
>> could only take pots), we used a dual T1 PCI card in an asterisk box, ran
>> PRI on the Telco interface, an ADIT 600 channel bank on the second
>> interface, and handed 4 POTS lines to the Nortel Key System.
>>
>> The key is to give your self the most flexibility to change later, and
>> preserve your existing investment.
>>
>> -Harry
>>
>> Thanks in advance,
>>
>>
>> Regards,
>>
>> Ikka - Jakarta, Indonesia
>>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160915/08ae453c/attachment.html>