[asterisk-users] How to set the global setting for each pjsip endpoint

[Thyda ENG]

My pjsip.conf is the auto_generated file from freepbx and it should not be
modified. I really cannot find where to set the messge_context in freepbx
UI at all. could you please show me where?

On Tue, Sep 22, 2015 at 10:22 PM, Thyda ENG <engthyda at gmail.com> wrote:

> how if I use the auto generate once from freepbx ?
>
> On Tue, Sep 22, 2015 at 10:12 PM, Ishfaq Malik <ish at pack-net.co.uk> wrote:
>
>>
>>
>> On 22 September 2015 at 16:04, Thyda ENG <engthyda at gmail.com> wrote:
>>
>>> I have many endpoints and each endpoint has some parameter in common so
>>> i wonder is there any way to config one for all endpoints? Like in my
>>> example I have two endpoints and I repeat the same thing,
>>>
>>> [100]
>>>
>>> type=endpoint
>>>
>>> aors=100
>>>
>>> auth=100-auth
>>>
>>> allow=ulaw,alaw,gsm,g726
>>>
>>> context=from-internal
>>>
>>> callerid=device <100>
>>>
>>> dtmf_mode=rfc4733
>>>
>>> use_avpf=no
>>>
>>> ice_support=no
>>>
>>> media_use_received_transport=no
>>>
>>> trust_id_inbound=yes
>>>
>>> send_pai=yes
>>>
>>> rtp_symmetric=yes
>>>
>>> rewrite_contact=yes
>>>
>>> message_context=astsms
>>>
>>>
>>> [200]
>>>
>>> type=endpoint
>>>
>>> aors=200
>>>
>>> auth=200-auth
>>>
>>> allow=ulaw,alaw,gsm,g726
>>>
>>> context=from-internal
>>>
>>> callerid=device <200>
>>>
>>> dtmf_mode=rfc4733
>>>
>>> use_avpf=no
>>>
>>> ice_support=no
>>>
>>> media_use_received_transport=no
>>>
>>> trust_id_inbound=yes
>>>
>>> send_pai=yes
>>>
>>> rtp_symmetric=yes
>>>
>>> rewrite_contact=yes
>>>
>>> message_context=astsms
>>>
>>>
>>> how could I avoid duplicate thing like this ?
>>>
>>> --
>>>
>>>
>> From my brief look at pjsip.conf it uses the same template concept as the
>> sip.conf.
>>
>> Here's the relevant instructions from the sip.conf in asteris13
>>
>>  ;
>> ; Because you might have a large number of similar sections, it is
>> generally
>> ; convenient to use templates for the common parameters, and add them
>> ; the the various sections. Examples are below, and we can even leave
>> ; the templates uncommented as they will not harm:
>>
>> [basic-options](!)                ; a template
>>         dtmfmode=rfc2833
>>         context=from-office
>>         type=friend
>>
>> [natted-phone](!,basic-options)   ; another template inheriting
>> basic-options
>>         directmedia=no
>>         host=dynamic
>>
>> [public-phone](!,basic-options)   ; another template inheriting
>> basic-options
>>         directmedia=yes
>>
>> [my-codecs](!)                    ; a template for my preferred codecs
>>         disallow=all
>>         allow=ilbc
>>         allow=g729
>>         allow=gsm
>>         allow=g723
>>         allow=ulaw
>>         ; Or, more simply:
>>         ;allow=!all,ilbc,g729,gsm,g723,ulaw
>>
>> [ulaw-phone](!)                   ; and another one for ulaw-only
>>         disallow=all
>>         allow=ulaw
>>         ; Again, more simply:
>>         ;allow=!all,ulaw
>>
>> ; and finally instantiate a few phones
>> ;
>> ; [2133](natted-phone,my-codecs)
>> ;        secret = peekaboo
>> ; [2134](natted-phone,ulaw-phone)
>> ;        secret = not_very_secret
>> ; [2136](public-phone,ulaw-phone)
>> ;        secret = not_very_secret_either
>> ; ...
>> ;
>>
>> Regards
>>
>> Ish
>> --
>>
>> Ishfaq Malik
>> Department: VOIP Support
>> Company: Packnet Limited
>> t: +44 (0)161 660 2350
>> f: +44 (0)161 660 9825
>> e: ish at pack-net.co.uk
>> w: http://www.pack-net.co.uk
>>
>> Registered Address: PACKNET LIMITED, Duplex 2, Ducie House
>> 37 Ducie Street
>> Manchester, M1 2JW
>> COMPANY REG NO. 04920552
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150923/5285978a/attachment.html>