[asterisk-users] Asterisk TON number

Wed Sep 25 09:24:10 CDT 2013

I asked you before.  What exactly are you trying to do that you cannot?  It
helps to be fairly detailed when asking a question to the list.  Include
error messages if you have any.

The dialplan and your ISDN configs are different things.  It sounds like
maybe you are having issues with with your dailplan and pattern matching.
 You can probably do all of that from the Trixbox GUI.  If you like
Trixbox, check out FreePBX since Trixbox is done.

Thanks,
Steve Totaro

On Wed, Sep 25, 2013 at 9:30 AM, Endri Stefani <endri.stefani at plus.al>wrote:

>  Hi guys****
>
> ** **
>
> Thanks a lot, I am just getting used to it, my telco managers J don’t
> trust stability for open source solution for voice(you give a headache to
> calling parties if lag is more than 250ms J ) and I want to prove them
> wrong. I have successfully integrated * with our system via ISDN and first
> calls look fast and clear but it is required to be flexible with TON number
> in order to be used. I tried unloading and loading chan-dahdi.conf like
> Hans suggested with no success TON was not changed.****
>
> Here is my chan_dahdi.conf, is there anything else I should do in order
> for new pridailplan came into action :****
>
> ** **
>
> ;****
>
> ; DAHDI telephony****
>
> ;****
>
> ; Configuration file****
>
> ** **
>
> [trunkgroups]****
>
> ** **
>
> [channels]****
>
> ** **
>
> switchtype = qsig****
>
> context = pri_incoming****
>
> group = 0****
>
> signalling = pri_cpe****
>
> channel => 1-15,17-31****
>
> ** **
>
> ** **
>
> ** **
>
> ;language=en****
>
> ;context=from-zaptel****
>
> ;signalling=fxs_ks****
>
> ;rxwink=300              ;****
>
> ; Whether or not to do distinctive ring detection on FXO lines****
>
> ;****
>
> ;usedistinctiveringdetection=yes****
>
> ** **
>
> usecallerid=yes****
>
> hidecallerid=no****
>
> callwaiting=yes****
>
> usecallingpres=yes****
>
> callwaitingcallerid=yes****
>
> threewaycalling=yes****
>
> transfer=yes****
>
> cancallforward=yes****
>
> callreturn=yes****
>
> echocancel=yes****
>
> echocancelwhenbridged=no****
>
> echotraining=400****
>
> rxgain=0.0****
>
> txgain=0.0****
>
> group=0****
>
> callgroup=1****
>
> pickupgroup=1****
>
> immediate=no****
>
> ** **
>
> ** **
>
> ;faxdetect=both****
>
> faxdetect=incoming****
>
> ;faxdetect=outgoing****
>
> ;faxdetect=no****
>
> ** **
>
> ;Include setup-pstn configs****
>
> #include dahdi-channels.conf****
>
> ** **
>
> group=1****
>
> ** **
>
> ;Include PBXconfig configs****
>
> #include chan_dahdi_additional.conf****
>
> ** **
>
> ** **
>
> unknown:        Unknown****
>
>  private:        Private ISDN****
>
>  local:          Local ISDN****
>
>  national:       National ISDN****
>
>  international:  International ISDN****
>
>  dynamic:        Dynamically selects the appropriate dialplan****
>
>  redundant:      Same as dynamic, except that the underlying number is not
> ****
>
>                  changed (not common)****
>
> ** **
>
> pridialplan = international****
>
> prilocaldialplan = international****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *$$ dave cantera
> (android asus)
> *Sent:* Wednesday, September 25, 2013 2:46 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
>
> *Subject:* Re: [asterisk-users] Asterisk TON number****
>
>  ** **
>
> if you are a serious teleco guy, which it seems you are. you might
> consider dumping trixbox in the near future. while trixbox does provide a
> good entry level into the * world, there are limitations that will
> eventually hold you back from enjoying the full breadth of utility that *
> offers.
>
> food for thought,
>
> Dave Cantera
> (856)813-7098 mobile/txt
> david.cantera at ibsonecall.com
>
> Sent from my ASUS Pad
>
> Steve Totaro <stotaro at totarotechnologies.com> wrote:****
>
>  ** **
>
> ** **
>
> On Wed, Sep 25, 2013 at 3:22 AM, Endri Stefani <endri.stefani at plus.al>
> wrote:****
>
> Hi****
>
>  ****
>
> Greeting to all you out there.****
>
>  ****
>
> I am new at asterisk, I have been working with PLMN platforms
> telecommunication for 5 years with NSN and Huawei.****
>
> We have recently built an asterisk PBX with Trixbox and connected it to
> our MSS using Digium E1 cards(ISDN). Everything went smoothly as there are
> tons of information out there, except for the TON number.****
>
> If you have worked in Telecommunication you will know the importance of
> TON flexibility. ****
>
> All the posts online suggested to update under Chan_dahdi.conf:****
>
> pridialplan = international****
>
> prilocaldialplan = international****
>
> or other TON value ,restart the platform and then trixbox1*CLI> dialplan
> reload****
>
> I have already done this with no success. Are there other changes I have
> to make in order to change dialplan?****
>
>  ****
>
>  ****
>
> Br****
>
>  ****
>
> ** **
>
> So what are you trying to do specifically?****
>
> ** **
>
> Thanks,****
>
> Steve Totaro ****
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130925/75cfc678/attachment-0001.html>