[asterisk-users] Asterisk TON number

[Endri Stefani]

Hi guys

Thanks a lot, I am just getting used to it, my telco managers ☺ don’t trust stability for open source solution for voice(you give a headache to calling parties if lag is more than 250ms ☺ ) and I want to prove them wrong. I have successfully integrated * with our system via ISDN and first calls look fast and clear but it is required to be flexible with TON number in order to be used. I tried unloading and loading chan-dahdi.conf like Hans suggested with no success TON was not changed.
Here is my chan_dahdi.conf, is there anything else I should do in order for new pridailplan came into action :

;
; DAHDI telephony
;
; Configuration file

[trunkgroups]

[channels]

switchtype = qsig
context = pri_incoming
group = 0
signalling = pri_cpe
channel => 1-15,17-31



;language=en
;context=from-zaptel
;signalling=fxs_ks
;rxwink=300              ;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=400
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no


;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include setup-pstn configs
#include dahdi-channels.conf

group=1

;Include PBXconfig configs
#include chan_dahdi_additional.conf


unknown:        Unknown
 private:        Private ISDN
 local:          Local ISDN
 national:       National ISDN
 international:  International ISDN
 dynamic:        Dynamically selects the appropriate dialplan
 redundant:      Same as dynamic, except that the underlying number is not
                 changed (not common)

pridialplan = international
prilocaldialplan = international



From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of $$ dave cantera (android asus)
Sent: Wednesday, September 25, 2013 2:46 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk TON number

if you are a serious teleco guy, which it seems you are. you might consider dumping trixbox in the near future. while trixbox does provide a good entry level into the * world, there are limitations that will eventually hold you back from enjoying the full breadth of utility that * offers.
food for thought,

Dave Cantera
(856)813-7098 mobile/txt
david.cantera at ibsonecall.com

Sent from my ASUS Pad

Steve Totaro <stotaro at totarotechnologies.com> wrote:


On Wed, Sep 25, 2013 at 3:22 AM, Endri Stefani <endri.stefani at plus.al<mailto:endri.stefani at plus.al>> wrote:
Hi

Greeting to all you out there.

I am new at asterisk, I have been working with PLMN platforms telecommunication for 5 years with NSN and Huawei.
We have recently built an asterisk PBX with Trixbox and connected it to our MSS using Digium E1 cards(ISDN). Everything went smoothly as there are tons of information out there, except for the TON number.
If you have worked in Telecommunication you will know the importance of TON flexibility.
All the posts online suggested to update under Chan_dahdi.conf:
pridialplan = international
prilocaldialplan = international
or other TON value ,restart the platform and then trixbox1*CLI> dialplan reload
I have already done this with no success. Are there other changes I have to make in order to change dialplan?


Br


So what are you trying to do specifically?

Thanks,
Steve Totaro
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130925/9165a4d6/attachment-0001.html>