[asterisk-users] ISDN- E1 PRI module in network side signaling

[Dimitar Dimitrov]

Thank you guys for the fast response.
I will try that.

Thanks.
Dimitar

On 03/31/2013 11:15 AM, Tony Mountifield wrote:
> In article <CAAoGpGR4Y2vYndtU3NSNLCT_6T1vDOjsGoUH634EC+ZfOgPWrg at mail.gmail.com>,
> Mitul Limbani <mitul at enterux.in> wrote:
>> On Mar 31, 2013 12:25 PM, "Dimitar Dimitrov" <ddimitrov at consult.bg> wrote:
>>
>>>   Hello everyone.
>>> I am looking for a E1 PRI card which supports network side signaling not
>>> CPE. The main idea is to connect an plain old E1 compliant PBX which
>>> doesn't have an VoIP module to the newly created VoIP infrastructure.
>>> Could we use a Digium TE122P or something other to resolve this situation?
>> Use pri_net as signalling mode inside chan_dadhi.conf in /etc/asterisk/
>> folder.
>>
>> You can set this up using any pri card thats supported on Asterisk.
> And you may need to make an E1 crossover cable. These are different from
> Ethernet crossover cables. You need to cross pair 1-2 with pair 4-5.
>
> Cheers
> Tony