[asterisk-users] ISDN- E1 PRI module in network side signaling

[Tony Mountifield]

In article <CAAoGpGR4Y2vYndtU3NSNLCT_6T1vDOjsGoUH634EC+ZfOgPWrg at mail.gmail.com>,
Mitul Limbani <mitul at enterux.in> wrote:
> On Mar 31, 2013 12:25 PM, "Dimitar Dimitrov" <ddimitrov at consult.bg> wrote:
> 
> >  Hello everyone.
> > I am looking for a E1 PRI card which supports network side signaling not
> > CPE. The main idea is to connect an plain old E1 compliant PBX which
> > doesn't have an VoIP module to the newly created VoIP infrastructure.
> > Could we use a Digium TE122P or something other to resolve this situation?
> 
> Use pri_net as signalling mode inside chan_dadhi.conf in /etc/asterisk/
> folder.
> 
> You can set this up using any pri card thats supported on Asterisk.

And you may need to make an E1 crossover cable. These are different from
Ethernet crossover cables. You need to cross pair 1-2 with pair 4-5.

Cheers
Tony
-- 
Tony Mountifield
Work: tony at softins.co.uk - http://www.softins.co.uk
Play: tony at mountifield.org - http://tony.mountifield.org