[asterisk-users] Asterisk trunking between two location

Asghar Mohammad asghar144 at gmail.com
Tue Jul 2 16:57:17 CDT 2013 

make a call and post cli log


On Tue, Jul 2, 2013 at 11:54 PM, Gopalakrishnan N <
gopalakrishnan.an at gmail.com> wrote:

> still the peer shows unreachable.... let me restart and give a try...
>
>
> On Wed, Jul 3, 2013 at 2:49 AM, Asghar Mohammad <asghar144 at gmail.com>wrote:
>
>> *1st Location*
>> [manila]
>> type=peer
>> username=indman01
>> secret=indman01
>> host=10.30.2.5 <-- ip of 2nd location
>> port=5060
>> context=Manila
>> insecure=port,invite
>> dtmfmode=rfc2833
>> relaxdtmf=yes
>> directmedia=no
>> qualify=yes
>> disallow=all
>> allow=g729
>> allow=ulaw
>>
>> 1st location dialplan
>> exten => _2XXX,1,Dial(SIP/manila/${EXTEN} <http://10.30.2.5/$%7BEXTEN%7D>
>> )
>> exten => _2XXX,n,Hangup
>>
>> *2nd Location*
>> [india]
>> type=friend
>> username=manind01
>> secret=manind01
>> host=dynamic
>> port=5060
>> context=10.20.111.48 <- ip of 1st location
>>  insecure=port,invite
>> dtmfmode=rfc2833
>> relaxdtmf=yes
>> directmedia=no
>> qualify=yes
>> nat=force_rport,comedia
>> disallow=all
>> allow=g729
>> allow=ulaw
>> allow=alaw
>>
>> 2st location dialplan
>> exten => _2XXX,1,Dial(SIP/india/${EXTEN} <http://10.30.2.5/$%7BEXTEN%7D>)
>> exten => _2XXX,n,Hangup
>>
>> then you should handle the call when it arrive in any server
>> let me know if it work.
>>
>>
>> On Tue, Jul 2, 2013 at 10:56 PM, Gopalakrishnan N <
>> gopalakrishnan.an at gmail.com> wrote:
>>
>>> I tried creating two trunks with following,
>>> *1st Location*
>>> [10.30.2.5]
>>> type=friend
>>> username=indman01
>>> secret=indman01
>>> host=dynamic
>>> port=5060
>>> context=Manila
>>> insecure=port,invite
>>> dtmfmode=rfc2833
>>> relaxdtmf=yes
>>> directmedia=no
>>> qualify=yes
>>> disallow=all
>>> allow=g729
>>> allow=ulaw
>>>
>>> *2nd Location*
>>> [10.20.111.48]
>>> type=friend
>>> username=manind01
>>> secret=manind01
>>> host=dynamic
>>> port=5060
>>> context=india
>>> insecure=port,invite
>>> dtmfmode=rfc2833
>>> relaxdtmf=yes
>>> directmedia=no
>>> qualify=yes
>>> nat=force_rport,comedia
>>> disallow=all
>>> allow=g729
>>> allow=ulaw
>>> allow=alaw
>>>
>>> My dialplan is like this
>>> exten => _2XXX,1,Dial(SIP/10.30.2.5/${EXTEN}<http://10.30.2.5/$%7BEXTEN%7D>
>>> )
>>> exten => _2XXX,n,Hangup
>>>
>>> And the output I get is
>>>  Executing [2001 at Test:1] Dial("SIP/3081-000027d2", "SIP/10.30.2.5/2001")
>>> in new stack
>>> [Jul  2 16:49:57] WARNING[15766][C-00002b94]: app_dial.c:2437
>>> dial_exec_full: Unable to create channel of type 'SIP' (cause 20 -
>>> Subscriber absent)
>>>   == Everyone is busy/congested at this time (1:0/0/1)
>>>     -- Executing [2001 at Test:2] Hangup("SIP/3081-000027d2", "") in new
>>> stack
>>>   == Spawn extension (Test, 2001, 2) exited non-zero on
>>> 'SIP/3081-000027d2'
>>>
>>> Actually the trunk which i mentioned in my first email, it was
>>> working... and from today it is not....
>>>
>>> Still breaking... what could be the reason... !
>>>
>>>
>>>
>>> On Wed, Jul 3, 2013 at 2:05 AM, Asghar Mohammad <asghar144 at gmail.com>wrote:
>>>
>>>> yes you can. just create trunks on both side with static ip and in dial
>>>> use trunk name.
>>>> exten => _X.,1,Dial(SIP/trunka/${EXTEN}) on side b and exten =>
>>>> _X.,1,Dial(SIP/trunkb/${EXTEN}) on side a.
>>>> make a call from a to b and one from b to and post cli log here or
>>>> upload anyware else.
>>>>
>>>>
>>>> On Tue, Jul 2, 2013 at 10:25 PM, Gopalakrishnan N <
>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>
>>>>> can't we use without register command both way as peer to peer?
>>>>>
>>>>>
>>>>> On Wed, Jul 3, 2013 at 1:45 AM, Asghar Mohammad <asghar144 at gmail.com>wrote:
>>>>>
>>>>>> 1. you permiting 10.10.10.0 on b but you should permit 10.30.2.0 on b
>>>>>> and 10.10.10.0 on a.
>>>>>> 2. use host=dynamic type=friend on  side A and host=ip type=peer on
>>>>>> side B.
>>>>>> 3. general section in sip.conf of side B register with server A.
>>>>>>
>>>>>> please see comments in sip.conf
>>>>>> ;dynamic_exclude_static = yes   ; Disallow all dynamic hosts from
>>>>>> registering
>>>>>>                                 ; as any IP address used for staticly
>>>>>> defined
>>>>>>                                 ; hosts.  This helps avoid the
>>>>>> configuration
>>>>>>                                 ; error of allowing your users to
>>>>>> register at
>>>>>>                                 ; the same address as a SIP provider.
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Tue, Jul 2, 2013 at 10:04 PM, Gopalakrishnan N <
>>>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>>>
>>>>>>> [servera]
>>>>>>> type=friend
>>>>>>> username=servera
>>>>>>> secret=servera
>>>>>>> host=10.30.2.5
>>>>>>> port=5060
>>>>>>> context=Manila
>>>>>>> insecure=port,invite
>>>>>>> dtmfmode=rfc2833
>>>>>>> relaxdtmf=yes
>>>>>>> directmedia=no
>>>>>>> qualify=yes
>>>>>>> disallow=all
>>>>>>> allow=g729
>>>>>>> allow=ulaw
>>>>>>> allow=alaw
>>>>>>> deny=0.0.0.0/0.0.0.0
>>>>>>> permit=10.30.2.5/255.255.255.0
>>>>>>>
>>>>>>> If i use host=dynamic, it wont communicate each other and will
>>>>>>> result to unmonitored....
>>>>>>>
>>>>>>>
>>>>>>> and the IP segment is two different segment. where am able to ping
>>>>>>> each other.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Jul 3, 2013 at 1:29 AM, Asghar Mohammad <asghar144 at gmail.com
>>>>>>> > wrote:
>>>>>>>
>>>>>>>> hi,
>>>>>>>> paste server a trunk also, if you want register why you are not
>>>>>>>> using host=dynamic?
>>>>>>>> both servers are on 10.10.10.0 ? if no then check your deny permit
>>>>>>>> seting.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Jul 2, 2013 at 9:53 PM, Gopalakrishnan N <
>>>>>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Also tried one more scenario, particularly from one IP to other IP
>>>>>>>>> not registering.
>>>>>>>>>
>>>>>>>>> For example like 10.10.10.5 to 10.20.10.5
>>>>>>>>>
>>>>>>>>> If it is 10.10.10.5 to 10.30.2.5 - working
>>>>>>>>> If it is 10.30.2.5 to 10.20.10.4 works fine.
>>>>>>>>>
>>>>>>>>> really strange... I suspect some issue on the network side...
>>>>>>>>>
>>>>>>>>> Problem is there is no packet loss.. with mtr it is fine,
>>>>>>>>> tracepath is fine, ping is fine... :(
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Jul 3, 2013 at 1:05 AM, Gopalakrishnan N <
>>>>>>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Am using Asterisk 11.2 in one location and 11.1 in another
>>>>>>>>>> location.
>>>>>>>>>>
>>>>>>>>>> when I trunk between two servers, the status is unreachable.
>>>>>>>>>>
>>>>>>>>>> But with different server with 11.2 and 11.2 it works fine.
>>>>>>>>>>
>>>>>>>>>> I tried both IAX and SIP.
>>>>>>>>>>
>>>>>>>>>> the trunk in sip.conf what i have is,
>>>>>>>>>> [serverb]
>>>>>>>>>> type=friend
>>>>>>>>>> username=serverb
>>>>>>>>>> secret=serverb
>>>>>>>>>> host=10.10.10.5
>>>>>>>>>> port=5060
>>>>>>>>>> context=default
>>>>>>>>>> insecure=port,invite
>>>>>>>>>> dtmfmode=rfc2833
>>>>>>>>>> relaxdtmf=yes
>>>>>>>>>> directmedia=no
>>>>>>>>>> qualify=3000
>>>>>>>>>> nat=force_rport,comedia
>>>>>>>>>> disallow=all
>>>>>>>>>> allow=g729
>>>>>>>>>> allow=ulaw
>>>>>>>>>> allow=alaw
>>>>>>>>>> deny=0.0.0.0/0.0.0.0
>>>>>>>>>> permit=10.10.10.5/255.255.255.0
>>>>>>>>>>
>>>>>>>>>> Is there any issue with 11.1?
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>> _____________________________________________________________________
>>>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>>>> New to Asterisk? Join us for a live introductory webinar every
>>>>>>>>> Thurs:
>>>>>>>>>                http://www.asterisk.org/hello
>>>>>>>>>
>>>>>>>>> asterisk-users mailing list
>>>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>> _____________________________________________________________________
>>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>>> New to Asterisk? Join us for a live introductory webinar every
>>>>>>>> Thurs:
>>>>>>>>                http://www.asterisk.org/hello
>>>>>>>>
>>>>>>>> asterisk-users mailing list
>>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> _____________________________________________________________________
>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>>>>                http://www.asterisk.org/hello
>>>>>>>
>>>>>>> asterisk-users mailing list
>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>>>                http://www.asterisk.org/hello
>>>>>>
>>>>>> asterisk-users mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>>                http://www.asterisk.org/hello
>>>>>
>>>>> asterisk-users mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>                http://www.asterisk.org/hello
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>                http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130702/8a69eb64/attachment.htm>

More information about the asterisk-users mailing list