[asterisk-users] Asterisk trunking between two location

Gopalakrishnan N gopalakrishnan.an at gmail.com
Tue Jul 2 16:54:35 CDT 2013 

still the peer shows unreachable.... let me restart and give a try...


On Wed, Jul 3, 2013 at 2:49 AM, Asghar Mohammad <asghar144 at gmail.com> wrote:

> *1st Location*
> [manila]
> type=peer
> username=indman01
> secret=indman01
> host=10.30.2.5 <-- ip of 2nd location
> port=5060
> context=Manila
> insecure=port,invite
> dtmfmode=rfc2833
> relaxdtmf=yes
> directmedia=no
> qualify=yes
> disallow=all
> allow=g729
> allow=ulaw
>
> 1st location dialplan
> exten => _2XXX,1,Dial(SIP/manila/${EXTEN} <http://10.30.2.5/$%7BEXTEN%7D>)
> exten => _2XXX,n,Hangup
>
> *2nd Location*
> [india]
> type=friend
> username=manind01
> secret=manind01
> host=dynamic
> port=5060
> context=10.20.111.48 <- ip of 1st location
>  insecure=port,invite
> dtmfmode=rfc2833
> relaxdtmf=yes
> directmedia=no
> qualify=yes
> nat=force_rport,comedia
> disallow=all
> allow=g729
> allow=ulaw
> allow=alaw
>
> 2st location dialplan
> exten => _2XXX,1,Dial(SIP/india/${EXTEN} <http://10.30.2.5/$%7BEXTEN%7D>)
> exten => _2XXX,n,Hangup
>
> then you should handle the call when it arrive in any server
> let me know if it work.
>
>
> On Tue, Jul 2, 2013 at 10:56 PM, Gopalakrishnan N <
> gopalakrishnan.an at gmail.com> wrote:
>
>> I tried creating two trunks with following,
>> *1st Location*
>> [10.30.2.5]
>> type=friend
>> username=indman01
>> secret=indman01
>> host=dynamic
>> port=5060
>> context=Manila
>> insecure=port,invite
>> dtmfmode=rfc2833
>> relaxdtmf=yes
>> directmedia=no
>> qualify=yes
>> disallow=all
>> allow=g729
>> allow=ulaw
>>
>> *2nd Location*
>> [10.20.111.48]
>> type=friend
>> username=manind01
>> secret=manind01
>> host=dynamic
>> port=5060
>> context=india
>> insecure=port,invite
>> dtmfmode=rfc2833
>> relaxdtmf=yes
>> directmedia=no
>> qualify=yes
>> nat=force_rport,comedia
>> disallow=all
>> allow=g729
>> allow=ulaw
>> allow=alaw
>>
>> My dialplan is like this
>> exten => _2XXX,1,Dial(SIP/10.30.2.5/${EXTEN}<http://10.30.2.5/$%7BEXTEN%7D>
>> )
>> exten => _2XXX,n,Hangup
>>
>> And the output I get is
>>  Executing [2001 at Test:1] Dial("SIP/3081-000027d2", "SIP/10.30.2.5/2001")
>> in new stack
>> [Jul  2 16:49:57] WARNING[15766][C-00002b94]: app_dial.c:2437
>> dial_exec_full: Unable to create channel of type 'SIP' (cause 20 -
>> Subscriber absent)
>>   == Everyone is busy/congested at this time (1:0/0/1)
>>     -- Executing [2001 at Test:2] Hangup("SIP/3081-000027d2", "") in new
>> stack
>>   == Spawn extension (Test, 2001, 2) exited non-zero on
>> 'SIP/3081-000027d2'
>>
>> Actually the trunk which i mentioned in my first email, it was working...
>> and from today it is not....
>>
>> Still breaking... what could be the reason... !
>>
>>
>>
>> On Wed, Jul 3, 2013 at 2:05 AM, Asghar Mohammad <asghar144 at gmail.com>wrote:
>>
>>> yes you can. just create trunks on both side with static ip and in dial
>>> use trunk name.
>>> exten => _X.,1,Dial(SIP/trunka/${EXTEN}) on side b and exten =>
>>> _X.,1,Dial(SIP/trunkb/${EXTEN}) on side a.
>>> make a call from a to b and one from b to and post cli log here or
>>> upload anyware else.
>>>
>>>
>>> On Tue, Jul 2, 2013 at 10:25 PM, Gopalakrishnan N <
>>> gopalakrishnan.an at gmail.com> wrote:
>>>
>>>> can't we use without register command both way as peer to peer?
>>>>
>>>>
>>>> On Wed, Jul 3, 2013 at 1:45 AM, Asghar Mohammad <asghar144 at gmail.com>wrote:
>>>>
>>>>> 1. you permiting 10.10.10.0 on b but you should permit 10.30.2.0 on b
>>>>> and 10.10.10.0 on a.
>>>>> 2. use host=dynamic type=friend on  side A and host=ip type=peer on
>>>>> side B.
>>>>> 3. general section in sip.conf of side B register with server A.
>>>>>
>>>>> please see comments in sip.conf
>>>>> ;dynamic_exclude_static = yes   ; Disallow all dynamic hosts from
>>>>> registering
>>>>>                                 ; as any IP address used for staticly
>>>>> defined
>>>>>                                 ; hosts.  This helps avoid the
>>>>> configuration
>>>>>                                 ; error of allowing your users to
>>>>> register at
>>>>>                                 ; the same address as a SIP provider.
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Jul 2, 2013 at 10:04 PM, Gopalakrishnan N <
>>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>>
>>>>>> [servera]
>>>>>> type=friend
>>>>>> username=servera
>>>>>> secret=servera
>>>>>> host=10.30.2.5
>>>>>> port=5060
>>>>>> context=Manila
>>>>>> insecure=port,invite
>>>>>> dtmfmode=rfc2833
>>>>>> relaxdtmf=yes
>>>>>> directmedia=no
>>>>>> qualify=yes
>>>>>> disallow=all
>>>>>> allow=g729
>>>>>> allow=ulaw
>>>>>> allow=alaw
>>>>>> deny=0.0.0.0/0.0.0.0
>>>>>> permit=10.30.2.5/255.255.255.0
>>>>>>
>>>>>> If i use host=dynamic, it wont communicate each other and will result
>>>>>> to unmonitored....
>>>>>>
>>>>>>
>>>>>> and the IP segment is two different segment. where am able to ping
>>>>>> each other.
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Jul 3, 2013 at 1:29 AM, Asghar Mohammad <asghar144 at gmail.com>wrote:
>>>>>>
>>>>>>> hi,
>>>>>>> paste server a trunk also, if you want register why you are not
>>>>>>> using host=dynamic?
>>>>>>> both servers are on 10.10.10.0 ? if no then check your deny permit
>>>>>>> seting.
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Jul 2, 2013 at 9:53 PM, Gopalakrishnan N <
>>>>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>>>>
>>>>>>>> Also tried one more scenario, particularly from one IP to other IP
>>>>>>>> not registering.
>>>>>>>>
>>>>>>>> For example like 10.10.10.5 to 10.20.10.5
>>>>>>>>
>>>>>>>> If it is 10.10.10.5 to 10.30.2.5 - working
>>>>>>>> If it is 10.30.2.5 to 10.20.10.4 works fine.
>>>>>>>>
>>>>>>>> really strange... I suspect some issue on the network side...
>>>>>>>>
>>>>>>>> Problem is there is no packet loss.. with mtr it is fine, tracepath
>>>>>>>> is fine, ping is fine... :(
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Jul 3, 2013 at 1:05 AM, Gopalakrishnan N <
>>>>>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Am using Asterisk 11.2 in one location and 11.1 in another
>>>>>>>>> location.
>>>>>>>>>
>>>>>>>>> when I trunk between two servers, the status is unreachable.
>>>>>>>>>
>>>>>>>>> But with different server with 11.2 and 11.2 it works fine.
>>>>>>>>>
>>>>>>>>> I tried both IAX and SIP.
>>>>>>>>>
>>>>>>>>> the trunk in sip.conf what i have is,
>>>>>>>>> [serverb]
>>>>>>>>> type=friend
>>>>>>>>> username=serverb
>>>>>>>>> secret=serverb
>>>>>>>>> host=10.10.10.5
>>>>>>>>> port=5060
>>>>>>>>> context=default
>>>>>>>>> insecure=port,invite
>>>>>>>>> dtmfmode=rfc2833
>>>>>>>>> relaxdtmf=yes
>>>>>>>>> directmedia=no
>>>>>>>>> qualify=3000
>>>>>>>>> nat=force_rport,comedia
>>>>>>>>> disallow=all
>>>>>>>>> allow=g729
>>>>>>>>> allow=ulaw
>>>>>>>>> allow=alaw
>>>>>>>>> deny=0.0.0.0/0.0.0.0
>>>>>>>>> permit=10.10.10.5/255.255.255.0
>>>>>>>>>
>>>>>>>>> Is there any issue with 11.1?
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>> _____________________________________________________________________
>>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>>> New to Asterisk? Join us for a live introductory webinar every
>>>>>>>> Thurs:
>>>>>>>>                http://www.asterisk.org/hello
>>>>>>>>
>>>>>>>> asterisk-users mailing list
>>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> _____________________________________________________________________
>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>>>>                http://www.asterisk.org/hello
>>>>>>>
>>>>>>> asterisk-users mailing list
>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>>>                http://www.asterisk.org/hello
>>>>>>
>>>>>> asterisk-users mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>>                http://www.asterisk.org/hello
>>>>>
>>>>> asterisk-users mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>                http://www.asterisk.org/hello
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>                http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130703/0fda2861/attachment-0001.htm>

More information about the asterisk-users mailing list