[asterisk-users] send the calls from to servers
Eric Wieling
EWieling at nyigc.com
Fri Dec 20 09:30:28 CST 2013
You must write dialplan code to do what you want. Assuming you are not using a GUI with Asterisk, post your dialplan used for outgoing calls.
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Friday, December 20, 2013 4:34 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] send the calls from to servers
hello
thanks for your response
i try to switch the provider in the same server without issue but my problem now i have 2 servers in the same network and with the same configuration
iw want to use the group 2 of the server 1 and group 2 of server 2 for the same calls. and if group 2 of server 1 is down i can continue to use group 2 of server 2
thanks and regards
[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1
[channels]
#include dahdi-channels.conf
context=default
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
rxgain=0.0
txgain=0.0
immediate=yes
echocancel=no
dtmfmode=auto
group=1
switchtype=euroisdn
signalling=pri_cpe
callgroup=1
;pickupgroup=1
immediate=no
channel => 1-15,17-31
group=2
callgroup=2
switchtype=qsig
signalling=pri_net
callerid=5xxxxxxxx
immediate=no
channel => 32-46,48-52
2013/12/19 Eric Wieling <EWieling at nyigc.com>
The basic idea is dial using your main outbound dahdi group, then check the value of HANGUPCAUSE, then if appropriate dial out using your secondary dahdi group. This is a standard thing. Check the mailing list archives and voip-info.org
See also the [stdexten] section of extensions.conf.sample
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Thursday, December 19, 2013 1:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] send the calls from to servers
i ask about outbound calls not inbound round-robin
best regards
2013/12/19 Eric Wieling <EWieling at nyigc.com>
Inbound call hunting is handled by your carrier, not Asterisk.
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Salaheddine Elharit
Sent: Thursday, December 19, 2013 12:52 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] send the calls from to servers
I have this scenario
In the first server 192.168.5.100 I have asterisk installed 1.4.43 and one diguim card with 2 ports: in the first port connection for the provider X : the second port of diguim card the connection of the provider Y
In the second server (the same configuration) 192.168.5.200 asterisk installed 1.4.43 and one diguim card with 2 ports : the first port is empty the second port the connection of the provider Y
My question how can I do in order to send the calls of the second providers from the port 2 server 1 and port 2 server 2 ()if one of them is down I continue to send the calls from the other
Thanks and regards
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list