[asterisk-users] send the calls from to servers

[Salaheddine Elharit]

hello
thanks for your response

i try to switch the provider in the same server without issue
but my problem now i have 2 servers in the same network and with the same
configuration

iw want to use the group 2 of the server 1 and group 2 of server 2 for the
same calls. and if group 2 of server 1 is down i can continue to use group
2 of server 2

thanks and regards


[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1,1

[channels]
#include dahdi-channels.conf

context=default
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
rxgain=0.0
txgain=0.0
immediate=yes
echocancel=no
dtmfmode=auto

group=1
switchtype=euroisdn
signalling=pri_cpe
callgroup=1
;pickupgroup=1
immediate=no
channel => 1-15,17-31

group=2
callgroup=2
switchtype=qsig
signalling=pri_net
callerid=5xxxxxxxx
immediate=no
channel => 32-46,48-52


2013/12/19 Eric Wieling <EWieling at nyigc.com>

>
> The basic idea is dial using your main outbound dahdi group, then check
> the value of HANGUPCAUSE, then if appropriate dial out using your secondary
> dahdi group.   This is a standard thing.  Check the mailing list archives
> and voip-info.org
>
> See also the [stdexten] section of extensions.conf.sample
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] On Behalf Of Salaheddine Elharit
> Sent: Thursday, December 19, 2013 1:32 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] send the calls from to servers
>
> i ask about outbound calls not inbound round-robin
>
> best regards
>
>
> 2013/12/19 Eric Wieling <EWieling at nyigc.com>
>
>
>         Inbound call hunting is handled by your carrier, not Asterisk.
>
>
>         -----Original Message-----
>         From: asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] On Behalf Of Salaheddine Elharit
>         Sent: Thursday, December 19, 2013 12:52 PM
>         To: Asterisk Users Mailing List - Non-Commercial Discussion
>         Subject: [asterisk-users] send the calls from to servers
>
>
>         I have this scenario
>
>
>         In the first server 192.168.5.100 I have asterisk installed 1.4.43
> and  one diguim card with 2 ports: in the first port connection for the
> provider X : the second port of diguim card  the connection of the provider
> Y
>
>
>         In the second server (the same configuration) 192.168.5.200
> asterisk installed 1.4.43 and  one diguim card with 2 ports : the first
> port is empty the second port  the connection of the provider Y
>
>
>         My question how can I do in order to send the calls of the second
> providers from the port 2 server 1 and port 2 server 2 ()if one of them is
> down I continue to send the calls from the other
>
>
>
>          Thanks and regards
>
>
>         --
>
> _____________________________________________________________________
>         -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>         New to Asterisk? Join us for a live introductory webinar every
> Thurs:
>                        http://www.asterisk.org/hello
>
>         asterisk-users mailing list
>         To UNSUBSCRIBE or update options visit:
>            http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20131220/6fdaa664/attachment.html>