[asterisk-users] "dahdi show channels" no such command

[Tzafrir Cohen]

On Wed, Dec 11, 2013 at 12:09:17PM -0800, Joseph Towery wrote:
> 
> 
> 
> 
> ________________________________
>  From: Tzafrir Cohen <tzafrir.cohen at xorcom.com>
> To: asterisk-users at lists.digium.com 
> Sent: Wednesday, December 11, 2013 1:37 PM
> Subject: Re: [asterisk-users] "dahdi show channels" no such command
>  
> 
> On Wed, Dec 11, 2013 at 09:22:13AM -0800, Joseph Towery wrote:
> 
> > Here is the output of lsdahdi:
> > asteriskpbx at pbxmain:~$ sudo lsdahdi
> > >### Span  1: WCTDM/0 "Wildcard TDM800P" (MASTER)
> > >  1 FXO        FXSKS       (EC: MG2 - INACTIVE)
> > >  2 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
> > >  3 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
> > >  4 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
> > >  5 FXS        FXOKS       (EC: MG2 - INACTIVE)
> > >  6 FXS        FXOKS       (EC: MG2 - INACTIVE)
> > >  7 FXS        FXOKS       (EC: MG2 - INACTIVE)
> > >  8 FXS        FXOKS       (EC: MG2 - INACTIVE)
> 
> >For the record: this output shows that the DAHDI channels have been
> >configured (they got the FXSKS signalling, which means it was applied by
> >running dahdi_cfg) but they are not '(in use)', which means that no
> >channel has been opened by Asterisk's chan_dahdi.
> 
>  
> Okay, I did run dahdi_cfg in an attempt to get the show channels working.  Is this a problem?  

Certainly not.

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com