[asterisk-users] "dahdi show channels" no such command

[Joseph Towery]

________________________________
 From: Tzafrir Cohen <tzafrir.cohen at xorcom.com>
To: asterisk-users at lists.digium.com 
Sent: Wednesday, December 11, 2013 1:37 PM
Subject: Re: [asterisk-users] "dahdi show channels" no such command
 

On Wed, Dec 11, 2013 at 09:22:13AM -0800, Joseph Towery wrote:

> Here is the output of lsdahdi:
> asteriskpbx at pbxmain:~$ sudo lsdahdi
> >### Span  1: WCTDM/0 "Wildcard TDM800P" (MASTER)
> >  1 FXO        FXSKS       (EC: MG2 - INACTIVE)
> >  2 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
> >  3 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
> >  4 FXO        FXSKS       (EC: MG2 - INACTIVE)  RED
> >  5 FXS        FXOKS       (EC: MG2 - INACTIVE)
> >  6 FXS        FXOKS       (EC: MG2 - INACTIVE)
> >  7 FXS        FXOKS       (EC: MG2 - INACTIVE)
> >  8 FXS        FXOKS       (EC: MG2 - INACTIVE)

>For the record: this output shows that the DAHDI channels have been
>configured (they got the FXSKS signalling, which means it was applied by
>running dahdi_cfg) but they are not '(in use)', which means that no
>channel has been opened by Asterisk's chan_dahdi.

 
Okay, I did run dahdi_cfg in an attempt to get the show channels working.  Is this a problem?  

Thanks,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20131211/cee7c6c8/attachment.html>